Atlona AT-OMNI-122 handleiding
Handleiding
Je bekijkt pagina 25 van 129
AT-OMNI-121 / AT-OMNI-122
25
Accessing the Web Server
In order to access the web server of the desired encoder/decoder, the IP address of the encoder must be known.
This can be accomplished by using any of the following methods: 1) Running IP scanner software or 2) accessing
the encoder using the domain name. When running an IP scanner, both the computer and the OmniStream
encoders/decoders must be connected to the same network.
TIP: Atlona recommends downloading and using the Network Assignment Planner, when
setting up OmniStream products on the network. Recording this information in this document
will provide a “snapshot” of the current OmniStream network conguration. The Network
Assignment Planner is available for download on the OmniStream product pages, under the
Resources tab.
Getting Started
1. Launch the desired web browser and enter the IP address or domain name of the encoder in the address bar.
2. Enter the username and password. Note that the password eld will always be masked. The default credentials
are:
Username: admin
Password: Atlona
3. The System Information page will be displayed.
Bekijk gratis de handleiding van Atlona AT-OMNI-122, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Atlona |
| Model | AT-OMNI-122 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18571 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 700 g |
| Breedte | 208 mm |
| Diepte | 112 mm |
| Hoogte | 34 mm |
