ATen VK211 handleiding
Handleiding
Je bekijkt pagina 18 van 35
Chapter 3. Configuration
10
keypress k 01,A0,A5,81,84↙: Single pressing with keycodes 01, A0, A5,
81 and 84.
keypress k 01+A0+A5 ↙: Key combination (01, A0 and A5), and all key are
released simultaneously.
keypress k 01+A0+A5 fdfu↙: Key combination (01, A0 and A5), and
keycode 01 is released at first.
keypress k 01 d 1000↙: Keycode 01 is long-pressed for 1000 ms.
keypress t 300↙: Set the time interval between key pressing to 300 ms.
Configuring Contact In Ports
Usage: Configure and save keypress actions to contact in ports.
Syntax:
io p<sequence1> k <sequence2> [type] [d duration] | [t interval]↙
Keyword:
p: port
k: keycode
d: duration
t: time interval
Parameter:
Sequency1: number for contact in port, for example, 01, 02, 03, 04
Sequence2:
XX: Press the key that corresponds to the specified once.
XX,YY,ZZ: Press the keys that correspond to the specified keycodes
once, in the specified order.
XX+YY+ZZ: Press the keys that correspond to the specified keycodes
at the same time.
Note: You can simulate up to 30 key within one keypress command.
type:
allup: Release all the specified keys simultaneously
fdfu (First down first up): For key combinations, a key that is pressed
first will also be released first.
fdlu (First down last up): For key combinations, a key that is pressed
first will be released at last.
Note: These parameters are used for key combination only.
Bekijk gratis de handleiding van ATen VK211, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ATen |
| Model | VK211 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2281 MB |
