ATen VK211 handleiding
Handleiding
Je bekijkt pagina 17 van 35
VK211 User Manual
9
Commands for Supported Actions
Simulating Keypresses
Usage: Simulate key presses with specified duration and interval.
Syntax:
keypress k <sequence> [type] [d duration] | [t interval]↙
Keyword:
k: keycode
d: the duration for pressing and holding a key.
t: the time interval between two key presses. The maximum value is
500ms.
Parameter:
sequence: Enter one or more keycode IDs. To look up keycode IDs, see
Supported Keycodes, page 14.
XX: Press the key that corresponds to the specified once.
XX,YY,ZZ: Press the keys that correspond to the specified keycodes
once, in the specified order.
XX+YY+ZZ: Press the keys that correspond to the specified keycodes
at the same time.
Note: You can simulate up to 30 key within one keypress command.
type:
allup: Release all the specified keys simultaneously
fdfu (First down first up): For key combinations, a key that is pressed
first will also be released first.
fdlu (First down last up): For key combinations, a key that is pressed
first will be released at last.
Note: These parameters are used for key combination only. The default
setting is allup.
duration: press and hold for the specified duration (ms).
interval: time interval between each key (ms). The maximum is 500ms.
Acknowledge:
Command OK: Command is correct and the function is executed.
Command incorrect: Command and/or parameters are incorrect and not
executed.
Example:
keypress k 01↙: Single pressing with keycode 01.
Bekijk gratis de handleiding van ATen VK211, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ATen |
| Model | VK211 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2281 MB |
