Ashly DigiMIX 24 handleiding
Handleiding
Je bekijkt pagina 9 van 36
9
Operating Manual - digiMIX24 Digital Mixer
2.19 Solo Button
Use the solo button for listening to one or more isolated signals in the headphones.
Select an input, output, subgroup, FX, or DCA group, then press the solo button to
include that signal in the solo bus. The default solo setting is pre-fader, meaning the
selected channel's solo level is not affected by its fader position.
Press the solo clear button to clear all solo-selected channels. With no channels
selected for solo, the headphone output defaults to the main L/R output. Solo status
can also be viewed and set from the touchscreen display.
The solo function will work in stereo for any linked inputs, aux or sub outs, or FX channels.
2.20 PFL Button
As part of the solo function, PFL is used to monitor selected solo channels at their
pre-fader level, meaning the selected solo channel(s) will still be heard even if its
fader is turned down.
2.21 Clear Button
This button clears all solo selections and returns the headphone output to main L/R.
2.22 Mute Button
The mute button is used to silence the selected input, output, aux or sub output, FX, or
DCA group. Mute status can also be seen or controlled using the touchscreen display.
2.23 LED Faders/Meters Select Button
This button is used to toggle the input LED bars (sec. 2.2) to either indicate the
current signal levels of all channels, or show the current fader position of all channels.
2.24 Pan Control
The pan control is dedicated to fading the selected channel from left to right in the mix. It is also used for Crossfade mode (sec.
6.6) to quickly fade between two assigned channels. Its stereo position for the selected channel is displayed on the touchscreen.
2.25 EQ Bypass Button
Press the EQ bypass button to disable the PEQ or GEQ on the selected channel. This is useful for comparing signal with and without EQ.
2.26 Mixer/Long Faders Select Button
This button toggles between the two main mixer displays, one showing every mixer input and output, the other showing groups
of eight channels with longer faders. Channel names are edited in long fader mode. To edit a channel name, press and hold the
channel name text box at the bottom of any long fader, then use the pop-up touchscreen keyboard to enter a new name.
If Crossfade mode is active (sec. 6.6), this button toggles through both mixer display modes plus Crossfade mode.
2.27 Adjust Parameter Control
This control is typically used to adjust the currently active or highlighted DSP parameter within the touchscreen display. It may
work together with other level controls.
2.28 Flat Button
Press this button to atten the PEQ or GEQ settings, or reset Exp/Gate or Comp/Limiter settings on the currently selected channel.
2.29 Enter (Tap) Button
This button has two functions. The rst is to offer a "Yes" response any time the touchscreen prompts for yes or no input, for
example selecting a DCA that has not yet been dened.
Bekijk gratis de handleiding van Ashly DigiMIX 24, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ashly |
| Model | DigiMIX 24 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10179 MB |
