Ashly DigiMIX 24 handleiding
Handleiding
Je bekijkt pagina 10 van 36
Operating Manual - digiMIX24 Digital Mixer
10
The second function is to manually set an FX delay time to match the beat of the music, also called as "tap delay". Press the FX1 or
FX2 button and select Delay as the effect type. Set the delay time by pressing the TAP button at the start and again at the end of the
desired delay time. Maximum tap delay is 1200ms.
2.30 System Buttons
The system button opens the touchscreen window to various functions including EZ-mode (sec. 6.4), digital output pre/post-DSP select,
aux5-8/sub1-4 mode select, cross-fade mode (sec. 6.6), auto-mixer channel assign (sec. 6.5), LCD brightness, fader speed calibration,
password/security functions, restore default settings, and more. The up/down/left/right (UDLR) system buttons are used to adjust
parameters in the various system functions, their purpose depending on the selected function. For example, with the GEQ function selected,
the two Left/Right system buttons move to select one of the 31 EQ bands, while the Up/Down buttons adjust the selected EQ lter level.
The buttons work together with touch controls on the screen, but for smaller touchscreen controls it is easier to use the UDLR buttons.
2.31 Save, Load, and Copy Buttons
There are four different types of user presets that can be saved/loaded on the digiMIX24.
1)
Scene - Scene presets are the most inclusive, capturing all audio settings in the mixer. Up to 24 scene presets are available.
2) DSP Channel - The DSP channel preset is used on inputs, outputs, aux, and subgroups. It saves/loads a single channel's
assignments, channel settings, gate, comp, and PEQ/GEQ settings. Up to 48 different DSP channel presets can be saved.
3) FX - FX presets are used to save/load up to 104 different user dened FX1 and FX2 effects.
4) GEQ - The 48 GEQ presets are only used to save/load graphic equalizer settings, which are only used on outputs.
SAVE: To save a mixer preset, rst press the save button, then use the touchscreen to select one of the four preset types. Next, select
a preset number to use, then press the preset name box, type in a preset name, press enter, then press Save on the touchscreen to
write to memory. Use UpPage and DownPage to navigate to the next available group of presets.
LOAD: To load a mixer preset, press the load button, then in the touchscreen window select the type of preset to load, then select
one of the available presets and press the touchscreen load button.
To delete a mixer preset, press the load button, select a preset to delete, then press the touchscreen delete button.
COPY: To copy current settings from one channel to another, press the Copy button on the mixer or the Copy Channel button
from the touchscreen system page. The resulting touchscreen window will display all inputs and outputs, with the currently se-
lected channel ashing. This is the channel that will be copied from, and can be changed by selecting any other channel using the
touchscreen or control surface select buttons.
Next, press the <Copy to: Select> button on the touchscreen and select every channel(s) you want settings to be copied to. Next,
press the touchscreen <Copy> button to complete the copying process.
►
TIP: All channel DSP functions are individually listed across the bottom of the touchscreen. Each function can be checked or
unchecked to include or exclude from being copied. Only the checked parameters will be copied.
Bekijk gratis de handleiding van Ashly DigiMIX 24, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ashly |
| Model | DigiMIX 24 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10179 MB |
