Arturia MiniBrute SE handleiding
Handleiding
Je bekijkt pagina 34 van 51
Arturia MiniBrute SE User's Manual 34
4.2.2.5 KBD Tracking
The filter cutoff frequency can also be keyboard-controlled. The KBD
Tracking knob lets you adjust how the cutoff follows the keyboard.
Repeat the exercise described in the Cutoff section, set the KBD
Tracking knob to 100% (12 o'clock), then play a series of notes on the
keyboard. The filter should open more to retain high frequencies as you
play higher up on the keyboard.
4.2.2.6 Envelope speed
This switch toggle the speed of both the filter and amplifier envelopes. In
fast mode, the ADSR curves can be very rapid, which is useful when
creating “snappy” and percussive sounds. In the slow mode, the ADSR
curves can be very slow, making them suitable for slow, evolving sounds
like pads.
4.2.2.7 Filter Envelope
In normal mode, the Filter envelope is triggered by the
keyboard GATE signal. It can also be triggered by other
GATE sources such as the Sequencer clock [] or the rear
panel’s external GATE IN jack [4.3.6]. Note that depending
on the position of the GATE Source switch located on the
rear panel [], the filter envelope is under the control of
either the keyboard GATE signal, the automatic GATE from
the external Audio input [4.3.3], or the hold position of the
GATE switch.
The Attack slider sets the duration of the envelope’s first stage. Depending on the
filter section’s ENV Speed switch [4.2.2.6] the Attack time ranges from 1ms to 1s or
from 10ms to 10s.
The Decay slider sets the duration of the envelope’s second stage. Depending on
the filter section’s ENV Speed switch [4.2.2.6] the Decay time ranges from 1ms to 1s
or from 10ms to 10s.
The Sustain slider sets the level of the envelope’s sustain stage.
The Release slider sets the duration of the envelope’s final stage. Depending on
the filter section’s ENV Speed switch [4.2.2.6] the Release time ranges from 1ms to
1s or from 10ms to 10s.
A LED indicator shows the amount of filter envelope sent to filter. The LED’s
brightness depends both on the envelope signal amplitude and on the Velocity
signal sent by the keyboard (when the Velocity function has been enabled over
USB by the MiniBrute Connection software; see the Software section of this
manual).
Bekijk gratis de handleiding van Arturia MiniBrute SE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Arturia |
| Model | MiniBrute SE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11481 MB |
