Anova OR9500 handleiding
Handleiding
Je bekijkt pagina 20 van 30
EN
20
Remove the oil dipstick and add hydraulic oil. The recommended hydraulic oil is 10W AW32,
ASLE H-150 or ISO 32. The tank capacity is 22.5 L.
Attention
Do not use the controls of the valves during draining or adding oil, to prevent the shovel and
hopper from falling.
(1) Oil filling
6.3. Track adjustment
With use, the tracks tend to loosen. When using the machine with loose tracks, they tend to
slide on the drive wheel, causing it to jump out of its housing, thus damaging the casing.
To check the tightness of the tracks, proceed as follows.
1. Place the machine on a flat surface with compact soil, such as asphalt or pavement.
2. Raise the machine and place it on blocks or supports suitable for the weight of the
machine, so that the tracks are approximately 10 cm from the ground.
3. Measure the midline of the track versus the horizontal line. The reading should not be
higher than 10cm ~ 15cm.
Bekijk gratis de handleiding van Anova OR9500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Anova |
| Model | OR9500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4996 MB |