Handleiding
Je bekijkt pagina 18 van 39
18
THE BELOW PROCEDURE APPLIES FOR F32-F40-F50-F60-F75-F100-F135
- Unscrew and remove the front ring (1)
- Untighten and remove the six Phillips screws (2). Pull out the front engraved ring (3)
- Untighten the seven Phillips screws (6) without removing them. Pull out the focus ring (4)
- Replace the focus ring or flip it by 180° for feet or meter use and tighten the Phillips screws (6) in contact
- Re-install the front engraved ring (3) and the front ring (1)
- Check and adjust the focus ring position to match the engraved distances and tighten uniformly the seven Phillips screws (6)
- Tighten all the screws in contact with a removable threadlock
1
2
3
4
5
6
Bekijk gratis de handleiding van Angénieux Optimo Prime 75, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Angénieux |
| Model | Optimo Prime 75 |
| Categorie | Lens |
| Taal | Nederlands |
| Grootte | 9433 MB |
