Handleiding
Je bekijkt pagina 17 van 39
17
FEET TO METER AND METER TO FEET SWAP
All of the Optimo Prime lenses have their focus scale ring engraved with both feet and metric scales. The swap of the focus scale from one system
to the other must be done with cautious in a clean environment to prevent dust or particles pollution inside the lens. If your focus ring needs to be
replaced please contact your local reseller or our service team at
angenieuxservice@fr.thalesgroup.com providing the serial number of the lens.
CAUTION: Please use a proper tool to prevent from any damage on the front ring (1) or on the front element (5). Parts numbers into brackets are
referring to the next pages figures except for F200 one.
CAUTION: After swapping the scale, please do always check the focus ring functioning. If you notice a mechanical play on the focus ring, tighten
more the seven Phillips screws (6) uniformly. If the focus torque is stiff or uneven, release and tighten more uniformly the seven Phillips screws
(6). Parts numbers into brackets are referring to the next pages figures.
TIP:
To help re-installing the focus scale, go to the infinity focus end-stop and put a pencil mark on the front engraved ring in front of the infinity
position. When installing the focus ring, align the infinity engraving with the mark made. After installing the focus ring, check if the marks are
correctly aligned by using a collimator, projector or camera. Proceed to a final accurate adjustment if necessary.
FEET
METER
Bekijk gratis de handleiding van Angénieux Optimo Prime 75, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Angénieux |
| Model | Optimo Prime 75 |
| Categorie | Lens |
| Taal | Nederlands |
| Grootte | 9433 MB |
