American DJ WMS2 handleiding
Handleiding
Je bekijkt pagina 16 van 30
16
INSTALLATION
VIDEO PANEL ASSEMBLY (CONTINUED)
3. Link the power and data ports of the video panels in the assembly together. Refer to the image
below for power and data port locations, and be sure to route all cables through the openings on
the edges of each video panel. Power in and power out can be connected to either of the power
ports, and similarly data in and data out can be connected to either of the data ports.
• Power: A maximum of four (4) panels can be linked together from the same power source
when running on 110V power, or eight (8) panels when running on 220V power. If additional
panels will be used, then the assembly will require multiple power sources.
• Data: A maximum of eight (8) panels can be linked together from a single controller port. If ad-
ditional panels will be used, then the assembly will require multiple data ports.
Please refer to the Wiring Diagrams section of this manual for examples of possible wiring con-
gurations.
2. Use a philips screwdriver to install the framing strips around any exposed edges of the video
panel assembly. The single inner hole at each end of the framing strip is used to attach the strip to
the video panel, while the two outer holes are used for connectors that link neighboring trim strips
together. Please note that the are two types of connectors: corner connectors and straight con-
nectors.
POWER
PORTS
DATA
PORTS
Video
Panel
Straight
Connector
Corner
Connector
Bekijk gratis de handleiding van American DJ WMS2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American DJ |
| Model | WMS2 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 5510 MB |