Alpine PSS-TSLA-21Y handleiding
Handleiding
Je bekijkt pagina 13 van 14
Tesla Model Y
PSS-TSLA 20240320v3
13/14
Rear Hatch Speaker Installation (EV-40M-T)
IMPORTANT: For Optimal Sound Quality Sound Dampening Is Highly Recommended for Tesla Applications
1
Remove the rear hatch panel.
Start by removing the 2 upper pillar shrouds (#1)
Once removed they should expose 2 Push Pins.
Release the Push Pins at both sides of the vehicle.
Using a panel tool release the panel from the body of the
vehicle. Pull out and unplug the single connector from
the panel. Hatch panel should now be able to remove
outside the vehicle
2
IMPORTANT: Re-install ALL Factory Plugs To Their Original Location, FAILURE TO DO SO CAN CREATE COMPUTER FAULTS.
FULLY POWER DOWN YOUR TESLA AND DISCONNECT BATTERY BEFORE CONTINUING. SEE POWER DOWN PROCEDURE
Disconnect the speaker plugs from each factory speaker.
Un-bend (9) tabs in each grille to expose both speaker
mounting anges. Using a T25 Torx bit undo 3 screws
from each driver and remove factory speaker.
3
Re-use the factory screws to install the new speakers
EV-40M-T. Re-attach the grilles to the pannel by bending
tabs into place. Install the 2 factory plugs to each
speaker.
4
1
Reconnect the factory plug and Install the panel with
new speakers into the hatch by alligning and applying
pressure to push clips. Lastly install the 2 pillar push pins
and upper pillar shrouds.
5
Bekijk gratis de handleiding van Alpine PSS-TSLA-21Y, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alpine |
| Model | PSS-TSLA-21Y |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14930 MB |
