Alpine PSS-TSLA-21Y handleiding
Handleiding
Je bekijkt pagina 14 van 14
Tesla Model Y
PSS-TSLA 20240320v3
14/14
Model 3 Subwoofer Installation (EV-100SW3-T)
IMPORTANT: For Optimal Sound Quality Sound Dampening Is Highly Recommended for Tesla Applications
1
Access the hatch subwoofer compartment by removing-
panels #1-#5. Use a Panel Removal tool to release the
clips. After removed do not lose the factory clips.
2
3
Mount the new subwoofer box and install to the factory
hardware mounting positions. Next re-fasten the factory
amplier using original hardware.
4
Install Harness Plug E to the subwoofer box plug
*Connect Integration Harness Plugs (C+D) to the rear
factory amplier if not already done*
5
IMPORTANT: Re-install ALL Factory Plugs To Their Original Location, FAILURE TO DO SO CAN CREATE COMPUTER FAULTS.
FULLY POWER DOWN YOUR TESLA AND DISCONNECT BATTERY BEFORE CONTINUING. SEE POWER DOWN PROCEDURE
3
1
2
4
5
3
To make room for the new subwoofer
#1 Dismount the factory ampler (2 Nuts 1 Bolt) 10mm
#2 Remove the factory subwoofer (3 Bolts) 10mm
*Sound Dampening is Highly Recommended at this
stage
1
2
Re-install the factory panels in the reverse order they
were removed (Start with #5)
Bekijk gratis de handleiding van Alpine PSS-TSLA-21Y, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alpine |
| Model | PSS-TSLA-21Y |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14930 MB |
