Alpine PSS-TSLA-21Y handleiding
Handleiding
Je bekijkt pagina 12 van 14
Tesla Model Y
PSS-TSLA 20240320v3
12/14
Rear Door Speaker Installation (EV-40M-T)
IMPORTANT: For Optimal Sound Quality Sound Dampening Is Highly Recommended for Tesla Applications
1
Remove the Rear Door Panels
Use a T30 Screw Driver Remove (2) Screws in Each Panel
(2) Screws are located under the door grip handle
Use a Panel Removal Tool around the edge of the panel
to release the factory clips. Release the panel and pull
upwards to detatch, un-plug the factory panel connec-
tions.
2
3
Using a Drill Bit, Drill out 3 Plastic Rivets on each Factory
Door Speaker. Use Care to not over-drill the screw boss
4
Using hand screw driver nstall the new Alpine Speaker to
the door panel using the (6) supplied phillips tapping
screws & Plug in the speaker connector
5
Plug in all remaining factory door connectors. Mount
and re-install each factory door panel using (2) T30 Torx.
Apply Pressure around the door panel to engage the
factory clips.
IMPORTANT: Re-install ALL Factory Plugs To Their Original Location, FAILURE TO DO SO CAN CREATE COMPUTER FAULTS.
FULLY POWER DOWN YOUR TESLA AND DISCONNECT BATTERY BEFORE CONTINUING. SEE POWER DOWN PROCEDURE
Drill out the Rivet
Replace 3 Rivet with Tapping Screw
Bekijk gratis de handleiding van Alpine PSS-TSLA-21Y, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alpine |
| Model | PSS-TSLA-21Y |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14930 MB |
