Advantech SPC-618WE handleiding
Handleiding
Je bekijkt pagina 23 van 71
SPC-618WE User Manual
13
Chapter 2
System
Setup
2.3.2 System Wiring
1. Ground the cabinet to earth.
2. Ensure proper grounding for all cabinets.
3. Connect the power supply ground to the cabinet.
4. Connect the SPC-618WE system's ground pin to the cabinet.
5. If necessary, connect I/O to the controller.
6. Connect the power supply's V+ and V- to the SPC-618WE system.
7. Proceed step by step through steps 1 to 6, then power on the SPC-618WE
system.
0.
Figure 2.4 System Wiring
NOTE!
Make sure all wires follow the installation guidelines to avoid perfor-
mance issues.
Power/Digital Ground and Earth Ground
The purpose is to block all the external interference on the chassis, and prevent
any possibility of bad grounding design to cause electric shock of people. This is
so called level 1 isolation which consumer PCs do not implement.
1. SPC Chassis and Earth (Power pin3) are short,
2. SPC Chassis and Power / Digital GND are OPEN.
0.
Bekijk gratis de handleiding van Advantech SPC-618WE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | SPC-618WE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9721 MB |
