Advantech FWA-1214 handleiding
Handleiding
Je bekijkt pagina 23 van 57
Figure 10 FWA-1214 DIN rail holder Installation
2.4.4 NMC-R0DK and NMC-R014T Installation
NMC-R0DK can be installed with two sets of NMC-R014T. Please refer to the figure below to remove the
cover on NMC-R0DK first, then install NMC-R014T into NMC-R0DK and use a screwdriver to tighten the
screws with appropriate torque to secure it. Please pay attention to the direction of NMC-R014T to connect
it correctly to the connector of NMC-R0DK.
Figure 2.4-11 NMC-R0DK and NMC-R014T Installation
2.4.5 FWA-1214 and NMC-R0DK Installation
NMC-R0DK needs to be assembled with FWA-1214 before use. Please refer to the figure below to first
remove the cover on NMC-R0DK, as well as the cover and screws on the corresponding connector position of
FWA-1214 (please note that there are 5 screws on the FWA-1214 end that need to be removed).
Bekijk gratis de handleiding van Advantech FWA-1214, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | FWA-1214 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13108 MB |
