Advantech ADAM-5000/TCP-CE handleiding
Handleiding
Je bekijkt pagina 11 van 222

3 ADAM-5000/TCP Series User Manual
Chapter 1 Understanding Your System
1.2.4 Communicating Isolation
High-speed transient suppressors isolate ADAM-5000/TCP Series Ethernet port from
dangerous voltage (up to 1500VDC) power spikes and avoid surge damage to the
whole system.
1.2.5 Completed set of I/O modules for total solutions
The ADAM-5000/TCP Series uses a convenient backplane system common to the
ADAM-5000 series. Advantech’s complete line of ADAM-5000 modules integrates
with the ADAM-5000/TCP Series to support your applications (not including ADAM-
5090). Full ranges of digital module supports 10 to 30 VDC input and outputs. A set
of analog modules provide 16-bit resolution and programmable input and output
(including bipolar) signal ranges. For details, refer to Chapter 4 I/O Modules.
1.2.6 Built-in real-time OS and watchdog timer
The microprocessor also includes a real-time OS and watchdog timer. A real-time OS
is available to handle several tasks at the same time. The watchdog timer is designed
to automatically reset the microprocessor if the system fails. This feature greatly
reduces the level of maintenance required and makes the ADAM-5000/TCP Series
ideal for use in applications which require a high level of system performance and
stability.
1.2.7 Software Support
The ADAM-5000/TCP Series firmware has a built-in Modbus/TCP server based on
the Modbus standard. Therefore, Advantech provides all the necessary DLL drivers,
OPC Server, and Windows Utility for users for client data for the ADAM-5000/TCP
Series. Users can configure this DA&C system via a Windows Utility; and integrate
them with HMI software packages via Modbus/TCP driver or Modbus/TCP OPC
Server. Even more, you can use the DLL driver or standard Modbus/TCP library to
develop your own applications.
1.2.8 Security Setting
Though Ethernet technology comes with great benefits in speed and integration,
there also exist risks about network invasion from outside. For this reason, a security
protection design was built into the ADAM-5000/TCP Series. Once the user has set
the password into the ADAM-5000/ TCP firmware, important system configurations
(network, firmware, password) can only be changed through password verification.
1.2.9 UDP Data Stream
Most of time, each host PC in a DA&C system needs to regularly request the I/O
devices via TCP/IP packets to update current data. This may cause data problems
and lower performance on the network, especially when there are frequent communi-
cations between multi-servers and I/O devices. To reduce communication issues in
the host computer on your Ethernet network, the ADAM-5000/TCP Series also sup-
ports UDP (User Datagram Protocol) protocol to broadcast data packets to specific
IPs without requesting commands. Users can apply this feature to implement data
streaming, event triggers, and other advanced functions.
1.2.10 Modbus Ethernet Data Gateway
Much more than an I/O system, ADAM-5000/TCP Series provides an RS-485 net-
work interface for other Modbus devices integration. It works as an Ethernet data
gateway, upgrading Modbus serial network devices up to Ethernet layer. ADAM-5511
Bekijk gratis de handleiding van Advantech ADAM-5000/TCP-CE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Advantech |
Model | ADAM-5000/TCP-CE |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 29002 MB |