Advantech ADAM-5000/TCP-CE handleiding
Handleiding
Je bekijkt pagina 12 van 222
ADAM-5000/TCP Series User Manual 4
supports a maximum of 16 nodes or 3rd party products with Modbus protocol support
which are allowed to integrate with ADAM-5000/TCP Series. This feature enlarges
your system scope, as opposed to other general I/O systems.
1.3 Technical Specification of ADAM-5000/TCP
1.3.1 System
CPU: ARM 32-bit RISC CPU
Memory: 4 MB Flash RAM
Operating System: Real-time O/S
Timer BIOS: Yes
I/O Capacity: 8 slots (ADAM-5000/TCP)
4 slots (ADAM-5000L/TCP)
Status Indicator: Power (3.3V, 5V), CPU, Communication (Link, Collide, 10/
100 Mbps)
CPU Power Consumption: 5.0W
Reset Push Bottom: Yes
1.3.2 Ethernet Communication
Ethernet: 10 BASE-T IEEE 802.3
100 BASE-TX IEEE 802.3u
Wiring: UTP, category 5 or greater
Bus Connection: 2 RJ45 LAN port share one MAC address
Comm. Protocol: Modbus/TCP
Data Transfer Rate: Up to 100 Mbps
Max Communication Distance: 100 meters
Even Response Time: < 5 ms
Data Stream Rate: 50 ms to 7 days
1.3.3 Serial Communication
RS-485 signals: DATA +, DATA-
Mode: Half duplex, multi-drop
Connector: Screw terminal
Transmission Speed: Up to 115.2 Kbps
Max. Transmission Distance: 4000 feet (1220 m)
1.3.4 Power
Unregulated 10 to 30V
DC
Protection: Over-voltage and power reversal
1.3.5 Isolation
Ethernet Communication: 1500 V DC
I/O Module: 3000 V DC
1.3.6 Mechanical
Case: KJW with captive mounting hardware
Plug-in Screw Terminal Block:
Accepts 0.5 mm2 to 2.5 mm2, 1 - #12 or 2 - #14 to #22 AWG
Bekijk gratis de handleiding van Advantech ADAM-5000/TCP-CE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | ADAM-5000/TCP-CE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 29002 MB |
