Advantech ADAM-5000/TCP-CE handleiding
Handleiding
Je bekijkt pagina 10 van 222
ADAM-5000/TCP Series User Manual 2
1.1 Introduction
Ethernet connectivity is trending in industrial applications. Longer communication dis-
tances, faster communication speeds, and greater advantages attract people into
developing their system based upon this network. But there used to be a threshold in
connecting information layers and field control layers. People usually had to prepare
a data exchange server between information systems and control systems as a com-
munication bridge. Obviously, it takes a lot of time and money. To meet user’s
requirements, Advantech announces the new DA&C system, the ADAM-5000/TCP
Series, the Ethernet I/O solution for people developing their eAutomation architec-
ture. It can be applied to various applications, such as traffic, building, telecom, water
treatment, and others.
ADAM-5000/TCP Series include the following 2 products:
ADAM-5000/TCP: 8-slot Distributed DA&C System for Ethernet
ADAM-5000L/TCP: 4-slot Distributed DA&C System for Ethernet
1.2 Major Features
1.2.1 Communication Network
By adopting a 32-bit RISC CPU, the ADAM-5000/TCP Series has greatly advanced
data processing abilities for the user, especially for network communications
(response time < 5ms). There is a standard RJ-45 modular jack Ethernet port on the
ADAM-5000/TCP’S CPU board, and I/O modules field signals would be able to link
with the Ethernet directly without assistance from other hardware devices such as
converters or data gateways. The communication speeds can be autoswitched
between 10 M and 100 Mbps data transfer rate depending upon the network environ-
ment. Through an Ethernet network, your DA&C systems, computer workstations,
and higher-level enterprise MIS servers can access plant- floor data. Such data can
be used in system supervising, product scheduling, statistical quality control, and
more.
1.2.2 Modbus/TCP Protocol
Modbus/TCP is one of the most popular standards for industrial Ethernet networks.
Following this communication protocol, the ADAM-5000/TCP Series is easy to inte-
grate with any HMI software packages or user-developed applications that support
Modbus. Users do not have to prepare a specific driver for the ADAM-5000/TCP
Series when they install the DA&C system with their own operating application. More-
over, the ADAM-5000/TCP Series works as a Modbus data server. It allows eight
PCs or tasks to access its current data simultaneously from anywhere: LAN, Intranet,
or Internet.
1.2.3 Hardware Capacity & Diagnostic
Advantech’s ADAM-5000/TCP Series is designed with a high I/O capacity and sup-
ports all types of ADAM-5000 I/O modules. Providing eight slots for any mixed mod-
ules, this DA&C system handles up to 128 I/O points (four ADAM-5024s allowed).
Different from other main units, the ADAM-5000/TCP Series not only has a higher I/O
capacity, but it also has a smarter diagnostic ability. There are eight indicators on the
front case of the CPU module. Users can read the system status clearly, including
power, CPU, Ethernet link, communication active, communication rate, and more. In
addition, there are also Tx and Rx LEDs on the Ethernet port, indicating data transfer
and reception.
Bekijk gratis de handleiding van Advantech ADAM-5000/TCP-CE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Advantech |
| Model | ADAM-5000/TCP-CE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 29002 MB |
