Adj Vizi Spot 5R handleiding

Niet gecategoriseerd

Adj

28 pagina's

PDF beschikbaar

Handleiding

American DJ® - www.americandj.com - Vizi Spot 5R Instruction Manual Page 31 American DJ® - www.americandj.com - Vizi Spot 5R Instruction Manual Page 32

6. Press ENTER to conrm.

7. Press MODE/ESC to return to the main menu.

DLAY - With this function you can delay the lamp ignition.

1. Access the main menu.

2. Tap the UP button until “SPEC” is displayed, press ENTER.

3. Tap the UP button until “DLAY” is displayed, press ENTER.

4. The display shows “D-00”. Press the UP button to select the

desired delay between “00” and “59” minutes. For example, if

you select “D-03” the lamp will ignite after 3 minutes.

5. Press ENTER to conrm.

6. Press MODE/ESC to return to the main menu.

SPOT - With this function you can adjust the lamp via

the control board. The shutter opens and the lamp can be

adjusted. In this mode, the device will not react to any con-

trol signal.

1. Access the main menu.

2. Tap the UP button until “SPEC” is displayed, press ENTER.

3. Tap the UP button until “SPOT” is displayed, press ENTER.

4. The display will show “ON/OFF”.

5. Press the UP button to select “ON” to activate this function,

or “OFF” to deactivate this function.

6. Press ENTER to conrm.

7. Press MODE/ESC to return to the main menu.

DFSE - With this function you can restore the factory

Vizi Spot 5R System Menu

settings of the device. All settings will be set back to the

default values. Any edited scenes will be lost. When restor-

ing the factory settings the unit must be set to the address

that the unit was in when you started editing.

1. Access the main menu.

2. Tap the UP button until “SPEC” is displayed, press ENTER.

3. Tap the UP button until “DFSE” is displayed, press ENTER.

4. The display will show “ON/OFF”.

5. Press the UP button to display “ON” to activate this function,

or “OFF” to deactivate this function.

6. Press ENTER to conrm.

7. Press MODE/ESC to return to the main menu.

When you exit this function, the unit will begin to reload

data.

FEED - Use this function to activate/deactivate the the

pan/tilt error correction. When the head is bumped or

moved it will return to its previous position.

1. Access the main menu.

2. Tap the UP button until “SPEC” is displayed, press ENTER.

3. Tap the UP button until “FEED” is displayed, press ENTER.

4. The display will show “ON/OFF”.

5. Press the UP button to select “ON” to activate this function,

or “OFF” to deactivate this function.

6. Press ENTER to conrm.

7. Press MODE/ESC to return to the main menu.

FANS - With this function you can choose between the fan

Vizi Spot 5R System Menu

Bekijk gratis de handleiding van Adj Vizi Spot 5R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.