Adj Vizi Spot 5R handleiding

Niet gecategoriseerd

Adj

28 pagina's

PDF beschikbaar

Handleiding

American DJ® - www.americandj.com - Vizi Spot 5R Instruction Manual Page 20American DJ® - www.americandj.com - Vizi Spot 5R Instruction Manual Page 19

Vizi Spot 5R System Menu

On-Board System Menu.

The Vizi Spot 5R comes with an easy to

navigate system menu. This next section will detail the functions of

each command in the system menu.

To access the main menu press the MODE/ESC button (3) on the front

of the unit. Tap the UP (4) or DOWN (5) butons until you reach func-

tion you wish to change. When you reach the function you wish to

change tap the ENTER (6) button. Again, tap the UP or DOWN buttons

to change the function. Once your changes are made, tap the ENTER

button to lock the change in the system, if the ENTER button is not

selected within eight seconds the system will automatically return to

menu section. To exit without making any changes tap the MODE/ESC

button.

ADDR MENU -

ADDR DMX Address Setting via control board -

1. Access the main menu.

2. Tap the UP button until “ADDR” is displayed, press ENTER.

3. “A001” will now be displayed. Press the UP or DOWN buttons

to nd your desired address. Press ENTER to conrm.

4. The display will show “PASS”, and then display, your selected

address again.

5. Press the MODE/ESC button to return to the main menu.

When the display is on “A001”, you can directly press the UP

or DN buttons to change the DMX start address.

TEST MAIN MENU -

TEST - This will test the functions of each channel.

1. Access the main menu.

2. Tap the UP button until “TEST” is displayed, press ENTER.

3. The display will show “T-01”. You can now press the up

Vizi Spot 5R System Menu

SPOT - This provides a spot beam for better lamp optimization.

DFSE - This will reset the unit to the default settings.

FEED - With this function you can activate or deactivate the

pan/tilt error correction. So if you units head gets knocked out

of place the unit will automatically go back to the last setting.

FANS - Select the fan run mode.

HIBE - This feature will automatically shut down the lamp and

stepping motors. Please see pages 32-33.

VER - This will display the software version.

ADJU - Fixture code is “C050”.

CH01~CH30 for motor calibration.

EDIT MENU -

SEPR (AUTO or IP01 - IP07) - Lets you edit any of the 7 internal

programs or auto program.

STEP (Step) - Steps to be used in Edit Programming. See ediit

program. See page 35.

SCXX (SC01 - SC48) - These are the scenes that are stored in

your program. There are a total of 48 scenes.

Submenus:

C-01~C-30 - Edit the channels of each scene.

TIME - Set the Time for each scene.

CEDT - Edit the program via external controller.

REC - This will auto save your custom program.

RUN - This will run your custom program.

Bekijk gratis de handleiding van Adj Vizi Spot 5R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.