Adj Vizi Spot 5R handleiding

Niet gecategoriseerd

Adj

28 pagina's

PDF beschikbaar

Handleiding

Vizi Spot 5R System Menu

3. Tap the UP button until “AUTO” is displayed, press ENTER.

4. Now you can choose between “CLOSE”, “HOLD” “AUTO”, or

“AUDI”. “HOLD” is the default setting.

5. Select the mode that you want the xture to run in case of a

lost DMX signal and press ENTER.

LAMP MAIN MENU -

OPEN With this function you can switch the lamp on or off

via the control board.

1. Access the main menu.

2. Tap the UP button until “LAMP” is displayed, press ENTER.

3. The display will show “ON/OFF”. Press the UP button to

select “ON” to switch on the lamp, or “OFF” to switch o the

lamp.

4. Press ENTER to conrm.

5. Press MODE/ESC to return to the main menu.

RESE MAIN MENU -

ALL With this function you can reset all the motors.

1. Access the main menu.

2. Tap the UP button until “RESE” is displayed, press ENTER.

3. Tap the UP button until “ALL” is displayed, press ENTER.

4. Press ENTER to reset.

5. Press MODE/ESC to return to the main menu.

SCAN With this function you can reset the pan/tilt motors.

1. Access the main menu.

American DJ® - www.americandj.com - Vizi Spot 5R Instruction Manual Page 22American DJ® - www.americandj.com - Vizi Spot 5R Instruction Manual Page 21

button and test the dierent channels.

4. Press MODE/ESC to exit.

PLAY MAIN MENU -

RUN Run the unit in an Auto mode as a “master” in a

Master/Slave conguration, or as a stand alone unit -

1. Access the main menu.

2. Tap the UP button until “PLAY” is displayed, press ENTER.

3. Tap the UP button until “RUN” is displayed, press ENTER.

4. Tap the UP or DOWN button to choose between “MSTR” or

“ALON“, select your choice by pressing ENTER, “PASS” will ash

in the display and xture will begin its function.

AUDI Run the unit in Sound Active mode as a “master”, or

as a stand alone unit -

1. Access the main menu.

2. Tap the UP button until “PLAY” is displayed, press ENTER.

3. Tap the UP button until “AUDI” is displayed, press ENTER.

4. Tap the UP or DOWN button to choose between “MSTR” or

“ALON“, select your choice by pressing ENTER, “PASS” will ash

in the display and xture will begin its function.

AUTO This is a precaution mode in case you lose the DMX

signal. The xtue has 4 modes to choose from, please see

page 17 for a description of the 4 modes -

1. Access the main menu by pressing MODE/ESC button.

2. Tap the UP button until “PLAY” is displayed, press ENTER.

Vizi Spot 5R System Menu

Bekijk gratis de handleiding van Adj Vizi Spot 5R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.