Adj Vizi Q Wash7 handleiding
Handleiding
Je bekijkt pagina 30 van 41
Vizi Q Wash7 System Menu
Last Clear - This will show you the last time the time was cleared.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so
that “Information” is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until “Time. Info” is displayed, press ENTER.
3. Press LEFT or RIGHT buttons, until “Last Clear” is displayed, and press ENTER.
4. Either “Off” or “On” will be displayed, use the LEFT or RIGHT buttons to toggle
between.
5. Press ENTER to conrm your selection or press MODE to exit.
Timer Pin - Timer Pin will allow you to clear the running time. See Clear Last for more
information.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so
that “Information” is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until “Time. Info” is displayed, press ENTER.
3. Press LEFT or RIGHT buttons, until “Timer Pin” is displayed, and press ENTER.
4. The “Timer Pin” is 050.
5. Press ENTER to conrm or press MODE to exit.
Clear Last - This will allow you to clear the LED running time. You need to put in the
Timer Pin before doing this. Please see Timer Pin.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so
that “Information” is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until “Time. Info” is displayed, press ENTER.
3. Press LEFT or RIGHT buttons, until “Clear Last” is displayed, and press ENTER.
4. Either “Off” or “On” will be displayed, use the LEFT or RIGHT buttons to toggle
between.
5. Press ENTER to conrm or press MODE to exit.
Temp. Info - This will allow you to check the moving head temperature.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so
that “Information” is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until “Temp. Info” is displayed, press ENTER.
3. “Head Temp.” will now be displayed, press ENTER.
4. “XXX” will now be displayed. “XXX” represents the current temperature of the moving
head.
5. Press MODE to exit.
Error. Info - This will allow you to see any errors that have occurred.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so
that “Information” is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until “Error. Info” is displayed, press ENTER.
3. Any errors that have occurred to Pan, Tilt, etc will now be displayed.
4. Press MODE to exit.
ADJ Products, LLC — www.adj.com — Vizi Q Wash7 — Page 30
Bekijk gratis de handleiding van Adj Vizi Q Wash7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Vizi Q Wash7 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5770 MB |
