Adj Vizi Q Wash7 handleiding
Handleiding
Je bekijkt pagina 31 van 41
Vizi Q Wash7 System Menu
Model. Info - This will allow you to see the model name
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so
that “Information” is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until “Model. Info” is displayed, press ENTER.
3. The model name will now be displayed.
4. Press MODE to exit.
Software. V - This will allow you to see the software version you are currently running.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so
that “Information” is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until “Software. V” is displayed, press ENTER.
3. The software version will now be displayed.
4. Press MODE to exit.
TEST
Reset. M - With this function you can reset the Pan & Tilt motors.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so
that “Test” is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until “Reset. M” is displayed.
3. Press ENTER to reset or press MODE to exit.
Test. Chan - With this function you can test each channel function.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so
that “Test” is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until “Test. Chan” is displayed, press ENTER.
3. Use the LEFT or RIGHT buttons to scroll through the various channels.
4. Press ENTER to select a channel to test or press MODE to exit.
Panel. Ctrl - With this function you can make ne adjustments.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so
that “Test” is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until “Panel. Ctrl” is displayed, press ENTER.
3. Use the LEFT or RIGHT buttons to scroll through the various functions.
4. Press ENTER when you nd the function you would like to adjust or press MODE to exit.
Calibrate - With this function you can calibrate and adjust the effects wheels to their correct
positions. The Calibration password 050.
NOTE: ONLY QUALIFIED TECHNICIANS SHOULD PERFORM
THIS FUNCTION.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so that “Test” is
highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until “Calibrate” is displayed, press ENTER.
3. “XXXX” will be displayed. The password is 050.
4. Press ENTER to conrm or press MODE to exit.
ADJ Products, LLC — www.adj.com — Vizi Q Wash7 — Page 31
Bekijk gratis de handleiding van Adj Vizi Q Wash7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Vizi Q Wash7 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5770 MB |
