Adj Vizi Q Wash7 handleiding
Handleiding
Je bekijkt pagina 29 van 41
Vizi Q Wash7 System Menu
Auto. Pro - This function allows the internal programs to run in either stand-alone or
primary/secondary mode. In “Primary” mode the xture will send DMX data to other
xtures connect via the DMX chain. In “Alone” mode, the xture will operate as a single
xture. The program for this mode is selected in the “Select program” section of the
control menu. You can set the number of steps under “Edit program”. You can edit
the individual scenes under “Edit scenes”. With this function, you can run the individual
scenes either automatically, i.e. with the adjusted Step-Time.
1. Access the main menu, and press the UP or DOWN buttons so that “Function” is
highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until “Auto. Pro” is displayed, and press ENTER.
3. Either “Primary” or “Alone” will be displayed. Use the LEFT or RIGHT buttons to nd
your desired setting.
4. Press ENTER to make your selection, or press MODE button to exit.
DFSE
DFSE - With this function you can restore the factory settings.
1. Access the main menu, and press the UP or DOWN buttons so that “Function” is
highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons so that “DFSE” is highlighted, then press ENTER.
3. Either “Off” or “On” will be displayed, use the LEFT or RIGHT buttons to toggle
between. Selecting “On” will restore the factory settings.
4. Press ENTER to conrm your selection or press MODE to exit.
INFORMATION
Time. Info (Time information is always represented in hours)
Current - This will allow you to check units current running time since power has been
activated.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so
that “Information” is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until “Time. Info” is displayed, press ENTER.
3. Press LEFT or RIGHT buttons, until “Current” is displayed, and press ENTER.
4. “XXXX” will now be displayed. “XXXX” represents the current running time.
5. Press ENTER or press MODE to exit.
Total Time - This will allow you to check units total running time.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons so
that “Information” is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until “Time. Info” is displayed, press ENTER.
3. Press LEFT or RIGHT buttons, until “Total Time” is displayed, and press ENTER.
4. “XXXX” will now be displayed. “XXXX” represents the total running time.
5. Press ENTER or press MODE to exit.
ADJ Products, LLC — www.adj.com — Vizi Q Wash7 — Page 29
Bekijk gratis de handleiding van Adj Vizi Q Wash7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Vizi Q Wash7 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5770 MB |
