Adj Vizi LED Spot handleiding

Niet gecategoriseerd

Adj

26 pagina's

PDF beschikbaar

Handleiding

American DJ® - www.americandj.com - Vizi LED Spot - Instruction Manual - Page 16American DJ® - www.americandj.com - Vizi LED Spot - Instruction Manual - Page 15

Vizi LED Spot System Menu

RPAN (REVERSE PAN) MENU -

ON/OFF - When “On” is chosen it will reverse the pan.

RTILT (REVERSE TILT) MENU -

ON/OFF - When “On” is chosen it will reverse the tilt.

FINE MENU -

ON/OFF - Switch between 8bit (coarse) and 16bit (ne) pan & tilt

movement. This also switches the DMX channel mode between

10 channel (8 bit) and 12 channel (16 bit) DMX mode.

DEGR MENU -

540/630 - Switch the degree of the Pan between 630 and 540.

MIC MENU -

M-01-M-70 - With this function you can make the internal mic

more or less sensitive to sound.

DISPLAY MENU -

VALU (DMX-512 Value) - Display the DMX-512 value of each

channel.

D ON - Display will turn off in 2 minutes.

FLIP - “Flips” the digital display 180º.

LOCK - When activated the buttons will lock automatically. See

page 25 for more information.

SPEC MENU -

RDMX - Lets you adjust the DMX address via external controller.

SPOT - This provides a spot beam for better lamp optimization.

DFSE (Default Settings) - Resets the unit to the default settings.

FEED - Pan/Tilt feedback (error correction) on/off.

SPEE - Adjust the movement mode.

FANS - Select the fan running mode.

HIBE - This feature will automatically shut down the lamp and

Vizi LED Spot System Menu

ADDRESS MENU -

AOO1 - A511 (Value) - This is where you set the DMX address of

the unit.

TEST MENU -

T-01 - T-XX (Test) - Tests the functions of each channel.

Note: Some channels cannot be tested.

PLAY MENU -

RUN - Runs the unit as a “master” or in a stand alone mode. The

unit will run a internal program mode.

AUDI (Audio) - Runs the unit as a “master” or in a stand alone,

sound active mode.

AUTO - This is a precaution mode in case the DMX signal is lost.

There are four settings to choose from:

• “Hold” - This is the default setting, which in case the signal is

lost the xute will “hold” at the last setting.

• “Close” - The xture will return to its “home” standing.

• “Auto” - The xture will go into Auto mode and run a pre-pro-

grammed show.

• “Audi” - The xture will go into Sound Active mode.

RESE (RESET) MENU -

ALL - Resets all the motors in the unit.

SCAN - Resets the motors that control pan/tilt.

COLR (Color) - Resets the color motors.

GOBO - Resets the gobo motors.

OTHR - Resets all other motors.

TIME MENU -

LIFE - Displays the xtures total running time.

CLMP - Clears the xture running time.

Bekijk gratis de handleiding van Adj Vizi LED Spot, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.