Adj Vizi LED Spot handleiding

Niet gecategoriseerd

Adj

26 pagina's

PDF beschikbaar

Handleiding

American DJ® - www.americandj.com - Vizi LED Spot - Instruction Manual - Page 18American DJ® - www.americandj.com - Vizi LED Spot - Instruction Manual - Page 17

stepping motors. Please see pages 32-33.

VER (Version) - Displays the software version

ADJU - Calibration functions

EDIT MENU -

SEPR (AUTO IP01 - IP07) - Lets you edit any of the 7 internal

programs.

STEP (S-01 - S-48) - These are the steps slots that you write

your programs into. There are at total of 48 steps. See edit pro-

gram.

SCXX (SC01 - SC30) - These are the scenes that are stored in

your program. There are a total of 30 scenes.

REC - This will auto save your custom program.

RUN - This will run your custom program.

Vizi LED Spot System Menu Vizi LED Spot System Menu

On-Board System Menu.

The Vizi LED Spot ccomes with an easy

to navigate system menu. This next section will detail the functions of

each command in the system menu.

To access the main menu press the MODE/ESC button (3) on the front

of the unit. Tap the UP (4) or DOWN (5) butons until you reach function

you wish to change. When you reach the function you wish to change

tap the ENTER button. Again, tap the UP or DOWN buttons to change

the function. Once your changes are made, tap the ENTER button to

lock the change in the system, if the ENTER button is not selected

within eight seconds the system will automatically return to menu sec-

tion. To exit without making any changes tap the MODE/ESC button.

ADDR MAIN MENU -

ADDR DMX Address Setting via control board -

1. Access the main menu.

2. Tap the UP button until “ADDR” is displayed, press ENTER.

4. Now the display will show “A001”. Adjust the DMX address

by pressing the UP or DOWN buttons.

5. Press ENTER to conrm.

6. Press the MODE/ESC button to return to the main menu.

When the display is on “A001”, you can directly press the UP

or DN buttons to change the DMX start address.

TEST MAIN MENU -

TEST - This will test the functions of each channel.

1. Access the main menu.

2. Tap the UP button until “TEST” is displayed, press ENTER.

3. The display will show “T-01”. You can now press the up

button and test the different channels.

Bekijk gratis de handleiding van Adj Vizi LED Spot, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.