Adj Vizi CMY 16RX handleiding
Handleiding
Je bekijkt pagina 29 van 43
ADJ Products, LLC ! ww.adj.com ! VIZI CMY 16RX User Instructions Page 29
LAMP SETTINGS
Lamp On/Off: With this function, switch the lamp On or Off from the control board.
1. Access the main menu, and press the UP or DOWN buttons so that “Lamp
Settings” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Lamp On/Off” is displayed, and press
ENTER. The current setting will now be displayed.
3. Use the UP or DOWN buttons to switch between “On” or “Off”. Selecting “On”
will strike the lamp; “Off” will turn off the lamp.
4. Press ENTER to confirm your selection or press the MENU button to return to
the main menu.
State/Power On: With this function, you can switch the lamp On or Off while the fixture
power is on.
1. Access the main menu, and press the UP or DOWN buttons so that “Lamp
Settings” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “State/Power On” is displayed, and press
ENTER. The current setting will now be displayed.
3. Use the UP or DOWN buttons to switch between “On” or “Off”. To keep the
lamp lit while the fixture power is on select “On”, select “Off” to turn the lamp
off while fixture power is on.
4. Press ENTER to confirm your selection or press the MENU button to return to
the main menu.
DISPLAY SETTING
Display Invert: With this function, you can “flip” the display 180 degrees.
1. Access the main menu, and press the UP or DOWN buttons so
that
“
Display
Setting” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Display Invert” is displayed, and press
ENTER. The current setting will now be displayed.
3. Use the UP or DOWN buttons to switch between “No” or “Yes”. Selecting
“Yes” will “flip” the display, “No” will return the display to normal.
4. Press ENTER to confirm your selection or press the MENU button to return to
the main menu.
Backlight Intensity: With this function, you can adjust the intensity of the display
backlight.
1. Access the main menu, and press the UP or DOWN buttons so that
“
Display
Setting” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Backlight Intensity” is displayed, and
press ENTER. The current setting will now be displayed.
3. Use the UP or DOWN buttons to adjust the intensity between1-10. 1 is the
lowest intensity, 10 the brightest.
4. Press ENTER to confirm your selection or press the MENU button to return to
the main menu.
VIZI CMY 16RX
System Menu
Bekijk gratis de handleiding van Adj Vizi CMY 16RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Vizi CMY 16RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7863 MB |
