Adj Vizi CMY 16RX handleiding
Handleiding
Je bekijkt pagina 30 van 43
ADJ Products, LLC ! ww.adj.com ! VIZI CMY 16RX User Instructions Page 30
Temperature Unit: With this function, you can switch the temperature setting
between Celsius and Fahrenheit.
1. Access the main menu, and press the UP or DOWN buttons so that
“
Display
Setting” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Temperature Unit” is displayed, and press
ENTER. The current setting will now be displayed.
3. Use the UP or DOWN buttons to switch between °C or °F.
4. Press ENTER to confirm your selection or press the MENU button to return to
the main menu.
FIXTURE TEST
Fixture Test: With this function, you can run an Auto Test or a
Manual Test.
1. Access the main menu, and press the UP or DOWN buttons so that
“
Fixtur
e Test”
is highlighted, then press ENTER.
2. Use the UP or DOWN buttons to switch between “Auto Test” or “Manual Test”.
3. Press ENTER to confirm your selection or press the MENU button to return to the
main menu.
FIXTURE INFORMATION
Fixture Hour Use: With this function, you can check the fixture running time.
1. Access the main menu, and press the UP or DOWN buttons so that
“
Fixtur
e
Information” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Fixture Hour Use” is displayed, and
press ENTER. The fixture running time will now be displayed.
3. Press the MENU button to return to the main menu.
Light
Hour Use
: With this function, you can check the lamp running time and reset the
lamp running time. NOTE: The lamp
running
time should be reset every time the lamp
is replaced.
1. Access the main menu, and press the UP or DOWN buttons so that
“
Fixtur
e
Information” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Light Hour Use” is displayed, and press
ENTER. The lamp life running time will now be displayed. Press the UP or
DOWN buttons to switch between “Exit” and “Reset Time”.
NOTE: If you have just replaced the lamp select “Reset Time” and press
ENTER. The lamp time will now be cleared.
3. To leave this function select “Exit” and press ENTER, or press the MENU button
to return to the main menu.
Temperature: With this function, you can check the fixture temperature.
1. Access the main menu, and press the UP or DOWN buttons so that
“
Fixtur
e
Information” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Temperature” is displayed, and press
ENTER. The current fixture temperature will now be displayed.
3. Press the MENU button to return to the main menu.
VIZI CMY 16RX
System Menu
Bekijk gratis de handleiding van Adj Vizi CMY 16RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Vizi CMY 16RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7863 MB |
