Adj Vizi Beam Hybrid 2R handleiding
Handleiding
Je bekijkt pagina 21 van 34
21
SYSTEM MENU
Feedback - With this function you can feedback switch the pan movement or tilt movement.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Personality” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Status Setting” is displayed, press ENTER.
3. Press UP or DOWN buttons, until “Feedback” is displayed, and press ENTER.
4. Either “Off” or “On” will be displayed, use the UP and DOWN buttons to toggle between.
5. Press ENTER to confirm your selection or press MODE/ESC to exit.
Movement Speed - With this function you can set the pan and tilt movement speed.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Personality” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Status Setting” is displayed, press ENTER.
3. Press UP or DOWN buttons, until “Movement Speed” is displayed, and press ENTER.
4. Either “Speed 1”, “Speed 2”, “Speed 3”, or “Speed 4” will be displayed, use the UP and DOWN
buttons to toggle between.
5. Press ENTER to confirm your selection or press MODE/ESC to exit.
Mic Sensitivity - With this function you can set the microphone sensitivity. The default setting is 70%.
You can adjust the sensitivity between 0%-99%
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Personality” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Status Setting” is displayed, press ENTER.
3. Press UP or DOWN buttons, until “Mic Sensitivity” is displayed, and press ENTER.
4. “70%” will be displayed, use the UP and DOWN buttons to adjust the sensitivity between 0%-99%.
5. Press ENTER to confirm your selection or press MODE/ESC to exit.
Hibernation - With this function the lamp and step motors will power off if there is no DMX signal within
15 mins (factory defualt). Once it receives a DMX signal, the fixture will reset itself.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Personality” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Status Setting” is displayed, press ENTER.
3. Press UP or DOWN buttons, until “Hibernation” is displayed, and press ENTER.
4. “15M” will be displayed, use the UP and DOWN buttons to adjust the hibernation period between
01M-99M or “Off”.
5. Press ENTER to confirm your selection or press MODE/ESC to exit.
Service Setting
Password - With this function you can enter the RDM password so that you can access and change
the RDM ID number.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Personality” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Service Settings” is displayed, press ENTER.
3. Press UP or DOWN buttons, until “Password” is displayed, and press ENTER.
4. The “Password” is 050.
5. Press ENTER or press MODE/ESC to exit.
RDM PID - RDM stands for “Remote Device Management”. This feature lets you control every aspect
of your fixture remotely from an RDM controller. Manual settings like adjusting the DMX address are no
longer needed. This is especially useful when the unit is installed in a remote area. In this submenu you
can see the units RDM ID number and adjust it as well.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Personality” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Service Settings” is dis- played, press ENTER.
3. Press UP or DOWN buttons, until “RDM PID” is displayed, and press ENTER.
4. “XXXXXX” will be displayed. “XXXXXX” represents the units current RDM ID.
5. Press ENTER or press MODE/ESC to exit.
Bekijk gratis de handleiding van Adj Vizi Beam Hybrid 2R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Vizi Beam Hybrid 2R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5180 MB |
