Adj Vizi Beam Hybrid 2R handleiding
Handleiding
Je bekijkt pagina 22 van 34
22
SYSTEM MENU
Fans Control
Auto Fan Speed - With this function you can adjust the speed of the running fans.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Personality” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Fans Control” is displayed, press ENTER.
3. Either “Auto Fan Speed” (default), “Low Fan Speed”, or “High Fand Speed” will be displayed, use
the UP and DOWN buttons to toggle between.
4. Press ENTER to confirm your selection or press MODE/ESC to exit.
Display Setting
Shutoff Time - With this function you can have the LCD display after 2-59 minutes. Use this function
to adjust the time.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Personality” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Display Setting” is displayed, press ENTER.
3. Press UP or DOWN buttons, until “Display Shutoff Time” is displayed, and press ENTER.
4. “05m” (5 minutes) will be displayed, use the UP and DOWN but tons to adjust the shutoff time
between 02m-60m or “Off”.
5. Press ENTER to confirm your selection or press MODE/ESC to exit.
Reverse - With this function you can rotate (flip) the display 180 degrees.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Personality” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Display Setting” is displayed, press ENTER.
3. Press UP or DOWN buttons, until “Display Reverse” is displayed, and press ENTER.
4. Either “Off” or “On” will be displayed, use the UP and DOWN but- tons to toggle between.
5. Press ENTER to confirm your selection or press MODE/ESC to exit.
Key Lock - With this function activated the buttons will lock automatically after 15 seconds.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Personality” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Display Setting” is displayed, press ENTER.
3. Press UP or DOWN buttons, until “Key Lock” is displayed, and press ENTER.
4. Either “Off” or “On” will be displayed, use the UP and DOWN buttons to toggle between.
5. Press ENTER to confirm your selection or press MODE/ESC to exit.
Temperature C/F - With this function, you can change the tempera- ture display to show either Celsius
or Fahrenheit.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Personality” is highlighted, then press ENTER.
2. Press UP or DOWN buttons, until “Temperature C/F” is displayed, and press ENTER.
3. Either “Celsius” or “Fahrenheit” will be displayed, use the UP and DOWN buttons to toggle between.
4. Press ENTER to confirm your selection or press MODE/ESC to exit.
Initial Status - In this menu you are able to check initial effect position.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Personality” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Initial Status” is displayed, press ENTER.
3. “XXX” will be displayed. “XXX” represents the current effect position.
4. Press ENTER or press MODE/ESC to exit.
Reset Default -
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Personality” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Reset Default” is displayed, press ENTER.
3. Either “Off” or “On” will be displayed, use the UP and DOWN buttons to toggle between.
4. Press ENTER to confirm your selection or press MODE/ESC to exit.
Bekijk gratis de handleiding van Adj Vizi Beam Hybrid 2R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Vizi Beam Hybrid 2R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5180 MB |
