Adj Vizi Beam Hybrid 2R handleiding
Handleiding
Je bekijkt pagina 20 van 34
20
SYSTEM MENU
PERSONALITY -
Time Information
Address via DMX - With this function you can adjust the DMX address via external controller.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Personality” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Status Setting” is displayed, press ENTER.
3. Press UP or DOWN buttons, until “Address via DMX” is displayed, and press ENTER.
4. Either “Off” or “On” will be displayed, use the UP and DOWN buttons to toggle between.
5. Press ENTER to confirm your selection or press MODE/ESC to exit.
To use this function, follow these instructions:
To adjust the address of your unit you must first go to the address that it is currently set to. From there
you can adjust the address. First make sure all channels are set to the value of “0”.
1. On your DMX controller set the DMX value of Channel 1 to the value “7”.
2. Now set the DMX value of Channel 2 to the value “7” to adjust the starting address between 1 and
255. To adjust the address between 256 and 511 set Channel 2 to the value “8” .
3. Set the DMX value of Channel 3 to your desired starting address. This will take about 20 seconds
before the unit accepts the new DMX address.
EXAMPLE: If you want the address to be 57, you must first set the address that is currently assingned
to the unit. Then set Channel 1’s value to “7”, Channel 2’s value to “7”, and Channel 3’s value to “57”.
Wait 20 seconds and the address should change on the unit to “57”.
2ND EXAMPLE: If you want the address to be 420, you must first set the address that is currently
assingned to the unit. If you want the set the address to 420, set Channel 1’s value to “7”, Channel 2’s
value to “8”, and Channel 3’s to “164”. (256 + 164 = 420).
No DMX status - With this function if the DMX signal is suddenly lost, the unit will automatically go into
1 of 3 modes.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Personality” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Status Setting” is displayed, press ENTER.
3. Press UP or DOWN buttons, until “No DMX Status” is displayed, and press ENTER.
4. Either “Hold” (Last DMX setting), “Close” (Blackout), “Music” (Sound Active), or “Auto” (Auto
Program) will be displayed, use the UP and DOWN buttons to toggle between.
5. Press ENTER to confirm your selection or press MODE/ESC to exit.
Pan Reverse - With this function you can reverse the Pan movement.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Personality” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Status Setting” is displayed, press ENTER.
3. Press UP or DOWN buttons, until “Pan Reverse” is displayed, and press ENTER.
4. Either “Off” or “On” will be displayed, use the UP and DOWN buttons to toggle between.
5. Press ENTER to confirm your selection or press MODE/ESC to exit.
Tilt Reverse - With this function you can reverse the Tilt movement.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Personality” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Status Setting” is displayed, press ENTER.
3. Press UP or DOWN buttons, until “Tilt Reverse” is displayed, and press ENTER.
4. Either “Off” or “On” will be displayed, use the UP and DOWN buttons to toggle between.
5. Press ENTER to confirm your selection or press MODE/ESC to exit.
Pan Degree - With this function you can change the pan degree from 630 to 540.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Personality” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Status Setting” is displayed, press ENTER.
3. Press UP or DOWN buttons, until “Pan Degree” is displayed, and press ENTER.
4. Either “540” or “630” will be displayed, use the UP and DOWN buttons to toggle between.
5. Press ENTER to confirm your selection or press MODE/ESC to exit.
Bekijk gratis de handleiding van Adj Vizi Beam Hybrid 2R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Vizi Beam Hybrid 2R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5180 MB |
