Adj Vizi Beam Hybrid 2R handleiding
Handleiding
Je bekijkt pagina 19 van 34
19
SYSTEM MENU
LAMP CONTROL -
Lamp On/Off - With this function you can switch the lamp on or off via the control board.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Lamp Control” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Lamp Off/On” is displayed, press ENTER.
3. Either “Off” or “On” will be displayed, use the UP and DOWN buttons to toggle between.
4. Press ENTER to confirm your selection or press MODE/ESC to exit.
Automatic On - With this function you can have the lamp automatically turn On when when switching
on the power.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Lamp Control” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Automatic On” is displayed, press ENTER.
3. Either “Off” or “On” will be displayed, use the UP and DOWN buttons to toggle between.
4. Press ENTER to confirm your selection or press MODE/ESC to exit.
Lamp on via external controller - With this function you can select if you want to switch the lamp on
via an external controller. This is used in conjuction with Internal Programs DMX channel, DMX values
40-59.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Lamp Control” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Lamp On Via DMX” is displayed, press ENTER.
3. Either “Off” or “On” will be displayed, use the UP and DOWN buttons to toggle between. Select “On”
if you wish to activate this function, or “Off” to deactivate.
4. Press ENTER to confirm your selection or press MODE/ESC to exit.
Lamp off via external controller - With this function you can select if you want to switch the lamp off
via an external controller. This is used in conjuction with Internal Programs DMX channel, DMX values
60-79.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Lamp Control” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Lamp Off Via DMX” is dis- played, press ENTER.
3. Either “Off” or “On” will be displayed, use the UP and DOWN buttons to toggle between. Select “On”
if you wish to activate this function, or “Off” to deactivate.
4. Press ENTER to confirm your selection or press MODE/ESC to exit.
Max on at temp. - With this function you can set the inside temperature from which the lamp will
restrike after automatic shut off.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Lamp Control” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Max On at Temp” is displayed, press ENTER.
3. “113°F” or “45°C” should now be displayed. “113°F” represents the temperature that the lamp will
restrike at. The temperature that is recommended is 113°F.
4. Press ENTER to confirm your selection or press MODE/ESC to exit.
Lamp off temp. - With this function you can set the inside temperature at which point the lamp will shut
off.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Lamp Control” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Max On at Temp” is displayed, press ENTER.
3. “266°F” or “130°C” should now be displayed. “266°F” or “130°C” represents the temperature that the
lamp will automatically switch off at. The temperature that is recommended is 266°F.
4. Press ENTER to confirm your selection or press MODE/ESC to exit.
NOTE: When the temperature around the lamp is higher then the preset value for longer then 5 mins,
the unit will automatically shut Off the lamp. If the lamp is automatically shut off due to over heat, it can
not be restriked automatically, it must be turned On again manually.
Bekijk gratis de handleiding van Adj Vizi Beam Hybrid 2R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Vizi Beam Hybrid 2R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5180 MB |
