Adj Vizi Beam Hybrid 2R handleiding
Handleiding
Je bekijkt pagina 18 van 34
18
SYSTEM MENU
Clean Last Run - This will allow you to clear the last run time of the unit. You need to put in the Last
Run Password before doing this. Please see the section before this.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Information” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Time Information” is displayed, press ENTER.
3. Press UP or DOWN buttons, until “Clean Last Run” is displayed, and press ENTER.
4. Either “Off” or “On” will be displayed, use the UP and DOWN buttons to toggle between.
5. Press ENTER to confirm your selection or press MODE/ESC to exit.
Lamp Time Password - This will display the lamp timer password.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Information” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Time Information” is displayed, press ENTER.
3. Press UP or DOWN buttons, until “Lamp Time Password” is displayed, and press ENTER.
4. The “Lamp Time Password” is 038.
5. Press ENTER or press MODE/ESC to exit.
Clean Lamp Time - This will allow you to clear the lamp time running time. Please clear the lamp
running time every time you replace the lamp. You need to put in the Lamp Time Password before doing
this. Please see the section before this.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Information” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Time Information” is displayed, press ENTER.
3. Press UP or DOWN buttons, until “Clear Lamp Time” is displayed, and press ENTER.
4. Either “Off” or “On” will be displayed, use the UP and DOWN buttons to toggle between.
5. Press ENTER to confirm your selection or press MODE/ESC to exit.
Temperature Info - This will allow you to check the moving head temperature.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Information” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Temperature Info” is displayed, press ENTER.
3. “Head Temperature” will now be displayed, press ENTER.
4. “XXX” will now be displayed. “XXX” represents the current temperature of the moving head.
5. Press ENTER or press MODE/ESC to exit.
Software Version - This will allow you to see the software version you are currently running.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Information” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Software Version” is displayed, press ENTER.
3. “VX.X” will now be displayed. “X.X” represents the software version.
4. Press ENTER or press MODE/ESC to exit.
Bekijk gratis de handleiding van Adj Vizi Beam Hybrid 2R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Vizi Beam Hybrid 2R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5180 MB |
