Adj Vizi Beam Hybrid 2R handleiding
Handleiding
Je bekijkt pagina 17 van 34
17
SYSTEM MENU
INFORMATION -
Time Information (Time information is always represented in hours)
Current Running Time - This will allow you to check units current running time.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Information” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Time Information” is dis- played, press ENTER.
3. Press UP or DOWN buttons, until “Current Time” is displayed, and press ENTER.
4. “XXXX” will now be displayed. “XXXX” represents the current run- ning time.
5. Press ENTER or press MODE/ESC to exit.
Total Running Time - This will allow you to check units total running time.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Information” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Time Information” is displayed, press ENTER.
3. Press UP or DOWN buttons, until “Total Run Time” is displayed, and press ENTER.
4. “XXXX” will now be displayed. “XXXX” represents the total run- ning time.
5. Press ENTER or press MODE/ESC to exit.
Last Run Time - This will allow you to check the last running time of the lamp.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Information” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Time Information” is displayed, press ENTER.
3. Press UP or DOWN buttons, until “Last Run Time” is displayed, and press ENTER.
4. “XXXX” will now be displayed. “XXXX” represents the last running time.
5. Press ENTER or press MODE/ESC to exit.
Lamp Hours - This will allow you to check the running time of the lamp.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Information” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Time Information” is displayed, press ENTER.
3. Press UP or DOWN buttons, until “Lamp Hours” is displayed, and press ENTER.
4. “XXXX” will now be displayed. “XXXX” represents the lamp running time.
5. Press ENTER or press MODE/ESC to exit.
Lamp Off Time - This will allow you to check the running time of the lamp the last time that the lamp
was On.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Information” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Time Information” is displayed, press ENTER.
3. Press UP or DOWN buttons, until “Lamp Off Time” is displayed, and press ENTER.
4. “XXXX” will now be displayed. “XXXX” represents the running time of the lamp the last time that the
lamp was On.
5. Press ENTER or press MODE/ESC to exit.
Last Run Password - This will display the timer password.
1. Press the MODE/ESC button to access the main menu. Press the UP or DOWN buttons so that
“Information” is highlighted, then press ENTER.
2. Press the UP or DOWN buttons until “Time Information” is displayed, press ENTER.
3. Press UP or DOWN buttons, until “Last Run Password” is dis- played, and press ENTER.
4. The “Last Run Password” is 038.
5. Press ENTER or press MODE/ESC to exit.
Bekijk gratis de handleiding van Adj Vizi Beam Hybrid 2R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Vizi Beam Hybrid 2R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5180 MB |
