Adj Vizi Beam Hybrid 2R handleiding
Handleiding
Je bekijkt pagina 16 van 34
16
SYSTEM MENU
The main menu is accessed by pressing the MODE/ESC button. Browse through the menu by using the
UP, DOWN, RIGHT, & LEFT buttons. Press the ENTER button to access the desired menu. You can scroll
through the submenus using the UP, DOWN, RIGHT, & LEFT buttons. To confirm every selection press the
ENTER button. You can exit every menu and submenu by pressing the MODE/ESC button. The unit will
automatically exit the menus if no buttons are pressed after 10 seconds. These next pages will explain each
func- tion in the menu layout located on the previous page.
FUNCTION -
Set DMX Address - With this function, you can adjust the desired DMX-address via the Control Board.
1. Access the main menu, and press the UP or DOWN buttons so that “Function” is higlighted, then press
ENTER.
2. Press the UP or DOWN buttons until “Set DMX Address” is displayed, and press ENTER. The current
DMX address will now be displayed.
3. Use the UP or DOWN buttons to adjust the DMX address.
4. Press ENTER to confirm or press MODE/ESC to return to the main menu.
DMX Value - This function will allow you to see the DMX value of each DMX channel that is currently being
used at the time.
1. Access the main menu, and press the UP or DOWN buttons so that “Function” is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until “DMX Value” is displayed, and press ENTER.
3. A DMX Channel will be displayed. Example: Prism, Color Wheel, Gobo Wheel, etc... Press ENTER when
you find the DMX channel that you would like to check. When you press ENTER the DMX value of that
channel will displayed.
4. Press the MODE/ESC button to exit.
Secondary Mode - This function lets you designate the unit as the secondary in Primary-Secondary
configuration.
1. Access the main menu, and press the UP or DOWN buttons so that “Function” is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until “Secondary Mode” is displayed, and press ENTER.
3. Either Secondary 1, Secondary 2, or Secondary 3 will be displayed. Press ENTER to select either of the
three, or press MODE/ESC button to exit.
Auto Program - This function allows the internal programs to run in either stand-alone or primary/secondary
mode. In “Primary” mode the fix- ture will send DMX data to other fixtures connect via the DMX chain. In
“Alone” mode the fixture will operate as a single fixture. The program for this mode is selected in the “Select
program” section of the control menu. You can set the number of steps under “Edit program”. You can
edit the individual scenes under “Edit scenes”. With this function, you can run the individual scenes either
automatically, i.e. with the adjusted Step-Time.
1. Access the main menu, and press the UP or DOWN buttons so that “Function” is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until “Auto Program” is displayed, and press ENTER.
3. Either “Primary” or “Alone” will be displayed.
4. Press ENTER to to make your selection, or press MODE/ESC button to exit.
Sound Control - With this function, the internal program will run in sound active mode.
1. Access the main menu, and press the UP or DOWN buttons so that “Function” is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until “Sound Control” is dis- played, press ENTER.
3. Either “Primary” or “Alone” will be displayed. Use the UP or DOWN buttons to change the operating mode
4. Press ENTER to to make your selection, or press MODE/ESC button to exit.
Bekijk gratis de handleiding van Adj Vizi Beam Hybrid 2R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Vizi Beam Hybrid 2R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5180 MB |
