Adj Quad Scan LED handleiding

Niet gecategoriseerd

Adj

14 pagina's

PDF beschikbaar

Handleiding

American DJ® - www.americandj.com - Quad Scan LED Instruction Manual Page 12 American DJ® - www.americandj.com - Quad Scan LED Instruction Manual Page 13

1. Press the MENU button until “LED” is displayed, press

ENTER.

2. The display will show either “ON” or “OFF”. Press the UP or

DOWN buttons to select “ON” to keep the LED display on at

all times, or “OFF” to switch to have the LED display switch o

after 10 seconds.

3. Press the ENTER button to conrm.

PAN - Pan Inversion

1. Tap the MENU button until “PAN” is displayed, press ENTER.

Either Yes or No will be displayed.

2. To activate the Pan inversion tap the UP or DOWN buttons

until YES is displayed, press ENTER to conm. To deactivate

Pan inversion, select NO and press Enter.

TILT - Tilt Inversion

1. Tap the MENU button until “TILT” is displayed, press ENTER.

Either YES or NO will be displayed.

2. To activate the Tilt inversion tap the UP or DOWN buttons

until YES is displayed, press ENTER to conm. To deactivate

Tilt inversion, select NO and press Enter.

DISP - This will “ip” the LED display 180º.

1. Press the MENU button until “dISP” is displayed, press ENTER.

2. Either “dISP” or “dSIP” will now be displayed. Press the UP or

DOWN buttons to select one or the other.

3. Press the ENTER button to conrm.

TEST - This function will run a self test program.

Quad Scan LED System Menu

1. Press the MENU button until “TEST” is displayed, press

ENTER.

2. The xture will now run a self test.

FHRS - With this function you can display the running time

of the xture.

1. Press the MENU button until “FHRS” is displayed, press

ENTER.

2. The running time of the xture will now be displayed. Press

MENU to exit.

VER - With this function you can display the version soft-

ware of the xture.

1. Press the MENU button until “VER” is displayed, press

ENTER.

2. The software version will now be displayed. Press MENU to

exit

RSET - Use this function to reset the unit.

1. Press the MENU button until “RSET” is displayed, press

ENTER.

2. The xture will now reset

Quad Scan LED System Menu

Bekijk gratis de handleiding van Adj Quad Scan LED, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.