Adj Quad Scan LED handleiding
Handleiding
Je bekijkt pagina 6 van 14
American DJ® - www.americandj.com - Quad Scan LED Instruction Manual Page 10
American DJ® - www.americandj.com - Quad Scan LED Instruction Manual Page 11
2. “Sh X” will now be displayed, “X” representing a number
between 0-16. Programs 0-16 are factory programs, while Show
0 is random mode. Press the UP or DOWN buttons to nd your
desired show and press the ENTER, then press and hold the
MENU button for at least 3 seconds to conrm.
SOUN - Sound Active mode.
1. Press the MENU button until “SOUN” is displayed, press
ENTER.
2. The display will show either “ON” or “OFF”. Press the UP or
DOWN buttons to select “ON” to activate sound active mode, or
“OFF” to deactivate sound active mode.
3. Press the ENTER, and then press and hold the MENU button
for at least 3 seconds to conrm.
SENS - Sound sensitivity control.
1. Press the MENU button until “SENS” is displayed, press ENTER.
2. The display will show a number between 0-100. Press the UP or
DOWN buttons to adjust the sound sensitivity. 0 being the least sen-
sitive and 100 the most sensitive.
3. Press the ENTER button to conrm.
BLND - Blackout or Stand by mode.
1. Press the MENU button until “BLND” is displayed, press
ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until “Yes”
is displayed, press ENTER to conm. The xture will now be in
Blackout mode. To deactivate Blackout mode, select “No” and
press Enter.
LED - With this function you can have the LED display
turn off after 10 seconds.
Quad Scan LED System Menu
Quad Scan LED System Menu
ADDR - DMX Address Setting.
1. Press the either the MENU, UP, or DOWN buttons until
“ADDR” is displayed, press ENTER.
2. The current address will now be displayed and ashing.
Press the UP or DOWN buttons to nd your desired address.
Press ENTER to set your desired DMX address.
CHND - This will let select your desired DMX channel
mode.
1. Press the either the MENU button until “CHND” is displayed,
press ENTER. Either “1CH”, “5CH” or “28CH” will be displayed
2. Press the UP or DOWN buttons to nd your desired DMX
mode and press ENTER to conm and exit.
SLND - This will let you set unit as a master or slave in a
master/slave conguration.
1. Press the MENU button until “SLND” is displayed, press
ENTER. Either “MAST”, “SL 1” or “SL 2” will be displayed.
2. Press the UP or DOWN buttons until your desired setting is
displayed, press ENTER to conm.
NOTE: In a Master/Slave conguration you can set one xture
to Master or Slave 1 (SL 1) and then set the next xture to Slave
2 (SL 2), in doing this the xtures will now have contrast move-
ment to each other.
SHND: SH 0 - SH16 - Show modes 0-16 (Factory programs).
Show mode can be run with sound activity or without. For show
mode to run without sound activity turn sound activity off.
1. Press the MENU button until “SHND” is displayed, press
ENTER.
Bekijk gratis de handleiding van Adj Quad Scan LED, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Quad Scan LED |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2216 MB |
