Adj Quad Scan LED handleiding

Niet gecategoriseerd

Adj

14 pagina's

PDF beschikbaar

Handleiding

American DJ® - www.americandj.com - Quad Scan LED Instruction Manual Page 15American DJ® - www.americandj.com - Quad Scan LED Instruction Manual Page 14

Quad Scan LED Operation

and press ENTER then press and hold MENU for 3 seconds to

con rm. See pages 10-11 for more info.

3. The optional UC3 Controller (not included) may be used to con-

trol different functions including blackout. See page 16 for UC3

controls and functions.

Master-Slave Operation This function will allow you to link up to 16

units together and operate without a controller. The units will be sound

activated. In Master-Slave operation one unit will act as the controlling

unit and the others will react to the controlling units programs. Any unit

can act as a Master or as a Slave.

1. Using approved DMX data cables, daisy chain your units togeth-

er via the XLR connector on the rear of the units. Remember the

Male XLR connector is the input and the Female XLR connector

is the output. The rst unit in the chain (master) will use the female

XLR connector only - The last unit in the chain will use the male

XLR connector only. For longer cable runs we suggest a termina-

tor at the last fixture.

2. On the Master unit find your desired show and set that show by

pressiing the ENTER button. After you have set your desired

show, press the MENU button until “SLND” is displayed, and Press

ENTER. Press the UP or DOWN buttons until “MAST” is displayed,

and press ENTER to conrm.

3. On the slave units press the MENU button until “SLND” is dis-

played, and press ENTER. Press the UP or DOWN buttons until

either “SL 1” or “SL 2” is displayed, choose your desired slave

mode and press ENTER to conrm.

4. The slave units will now follow the Master unit.

NOTE: In a Master/Slave conguration you can set one xture to

Master or Slave 1 (SL 1) and then set the next xture to Slave 2 (SL

2), in doing this the xtures will now have contrast movement to each

other.

With this feature you can connect the xtures to one another

using the IEC input and output sockets. The quantity that can be

connected is 5 xtures maximum. After 5 xtures you will need

to use a new power outlet. They must be the same xtures. DO

NOT mix xtures.

Quad Scan LED Power Cord Daisy Chain

Operating Modes: The Quad Scan LED can operate in three

different modes. In each mode you can run the fixture as a

stand alone fixture or in a master/slave confiugration.

Universal DMX Control: This function allows you to use a univer-

sal DMX-512 controller to control the chases and patterns, dimmer

and strobe. A DMX controller allows you to create unique programs

tailored to your individual needs.

1. The Quad Scan LED can be a 1, 5, or 28 DMX channel fixture.

See pages 16-21 for detailed description of the DMX values and

traits.

2. To control your fixture in DMX mode, follow the set-up procedures

on pages 6-8 as well as the set-up specifications that are includ-

ed with your DMX controller.

3. Use the controller’s faders to control the various DMX fixture traits.

4. Follow the instructions on page 10 to set the DMX address.

5. For longer cable runs (more than a 100 feet) use a terminator on

the last fixture.

6. For help operating in DMX mode consult the manual included

with your DMX controller.

Sound Active Mode: This mode allows either single unit or several

units linked together, to run to the beat of the music.

1. Press the MENU button until “SOUN” is displayed, and press

ENTER.

2. Press the UP or DOWN buttons so that “ON” is displayed, and

press ENTER to conrm and then hold MENU for at least 2-3 sec-

onds.

3. To adjust the sound sensitivity press the MENU button until

“SENS” is displayed and press ENTER. Use the UP or DOWN but-

tons to adjust sensitivity.

4. The optional UC3 Controller (not included) may be used to con-

trol different functions including blackout. See page 16 for UC3

controls and functions.

Show Mode: In this mode you can select 1 of 16 shows to run.

1. Press the MENU button until “SHND” is displayed, and press

ENTER.

2. Press the UP or DOWN buttons until you nd your desired show,

Quad Scan LED Operation

Bekijk gratis de handleiding van Adj Quad Scan LED, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.