Adj Monster Fun handleiding
Handleiding
Je bekijkt pagina 6 van 10
ADJ Products, LLC - www.adj.com - Monster Fun Instruction Manual Page 11
show and press ENTER to conrm. After pressing ENTER, press
and hold the MENU button for at least 3 seconds to activate.
Sound State - In this mode the unit will run in sound
active mode.
1. Press the MENU button until “Sound State” is displayed, press
ENTER.
2. Either “On” or “O” will now be displayed. Use the UP or
DOWN buttons to toggle between “On” and “O”.
3. Press ENTER to conrm your selection, the press and hold the
MENU button to activate.
Sound Sense - This function will let you adjust the
sound sensitivity of the sound active mode.
1. Press the MENU button until “Sound Sense” is displayed,
press ENTER.
2. Press the UP or DOWN buttons to adjust the sensitivity level.
The sensitivity level can be adjusted between 0 (least sensitive)
and 100 (most sensitive).
3. Press ENTER to set you desired level.
DMX State - This mode is used as a precaution mode.
In case the DMX signal is lost, the operating mode chosen in
the setup is the running mode the xture will go into when
the DMX signal is lost. You can also set this as the operat-
ing mode you would like the unit to return to when power is
applied.
1. Press the MENU button until “DMX State” is displayed, press
ENTER.
2. Either “Master/Slave”, “Blackout”, or “Last State” will be dis-
played. Choose an operating mode you would like the unit to
start up in when either power is applied or the DMX signal is lost.
Monster Fun System Menu
ADJ Products, LLC - www.adj.com - Monster Fun Instruction Manual Page 10
Monster Fun System Menu
System Menu: When making adjustments press ENTER to
conrm your setup then press and hold the MENU button
for at least 3 seconds. To exit without making any adjust-
ments press the MENU button. The display will lock after 30
seconds, press the MENU button for 3 seconds to unlock.
DMX Address - Set the DMX Address -
1. Press the MENU button until “DMX Address” is displayed,
press ENTER.
2. “XXX” will now be displayed, “XXX” represents the displayed
address. Press the UP or DOWN buttons to nd your desired
address.
3. Press ENTER to conrm, and then press and hold the MENU
button for at least three seconds to assign.
Slave Mode - This will let you set the unit as a slave in
a master/slave conguration.
1. Press the MENU button until “Slave Mode” is displayed,
press ENTER. Either “Master”, “Slave 1”, or “Slave 2” will be
displayed.
2. Press the UP or DOWN buttons until your desired setting is
displayed, press ENTER to conm.
NOTE: In a Master/Slave conguration you can make one
xture the Master and then set the next xture to “Slave 2”, the
xtures will now have contrast movement to each other.
Show Mode - Show modes 0 - 12 (Factory Shows).
1. Press the MENU button until “Show Mode” is displayed, press
ENTER.
2. “Show X” will now be displayed, “X” representing a number
between 0-12. Shows 1-12 are preset shows, while “Show 0” is
random show. Press the UP or DOWN buttons to nd your desired
Bekijk gratis de handleiding van Adj Monster Fun, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Monster Fun |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1503 MB |
