Adj Monster Fun handleiding
Handleiding
Je bekijkt pagina 7 van 10
ADJ Products, LLC - www.adj.com - Monster Fun Instruction Manual Page 12 ADJ Products, LLC - www.adj.com - Monster Fun Instruction Manual Page 13
• Blackout - If the DMX signal is lost or power is lost then applied,
the unit will automatically go into stand by mode.
• Last State - If the DMX signal is lost or power is lost then
applied, the xture will stay in the last DMX set up. If power is
applied and this mode is set, the unit will automatically go into
the last DMX set up.
• Master/Slave - If the DMX signal is lost or power is lost then
applied, the unit will automatically go into Master/Slave mode.
3. Press ENTER to conrm your desired set up.
Back Light - With this function you can make the LCD
backlight automatically turn off after two minutes.
1. Press the MENU button until “Back Light” is displayed, press
ENTER.
2. Either “On” or “O” will now be displayed. Press the UP or
DOWN buttons to select “On” to keep the backlight on at all
times, or “O” to allow the backlight to turn o after 2 minutes.
Press any button to turn the backlight on again.
3. Press ENTER to conrm.
Auto Test - This function will run a self test program.
1. Press the MENU button until “Auto Test” is displayed, press
ENTER.
2. The xture will now run a self test. Press the MENU button to
exit.
Fixture Time - With this function you can display the
running time of the unit.
1. Press the MENU button until “Fixture Time” is displayed,
press ENTER.
2. The running time of the xture will now be displayed. Press
Monster Fun System Menu
MENU to exit.
Firmware Version - This will display the software ver-
sion
1. Press the MENU button until “Firmware Version” is displayed.
Press the ENTER button and the software vesion will be dis-
played.
2. Press the MENU button to leave this function.
Monster Fun System Menu
The optional UC-IR infrared remote (sold separately) has many dif-
fernet functions and gives you complete control of your Monster Fun.
To control the your desired fixture you must aim the controller at the
front of the fixture and be no more the 30 feet away.
STAND BY - Pressing this button will blackout the fixture.
FULL ON - This button will not function with this fixture.
FADE/GOBO - When sound mode is off, this button will make the fix-
ture fade from one color to the other.
COLOR - Press this button to activate color mode. Use buttons 1-9
to select your desired color.
STROBE - Press and hold this button for at least 3 seconds to acti-
vate random strobe. Press this button quickly to activate sound ac-
tive strobe.
SPEED - Invalid for this fixture.
SOUND ON & OFF - These buttons activate and deactivate the
sound active mode.
SHOW - Press this button to activate show mode. Use buttons 1-9 to
select your desired show. Show 0 is activates all shows.
“DIMMER +” and “DIMMER -” - These buttons are are not used for
this fixture.
Monster Fun UC-IR Control
Bekijk gratis de handleiding van Adj Monster Fun, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Adj |
| Model | Monster Fun |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1503 MB |
