Adj Inno Color Beam LED handleiding

Niet gecategoriseerd

Adj

12 pagina's

PDF beschikbaar

Handleiding

Inno Color Beam LED System Menu Inno Color Beam LED System Menu

Dimmer Mode 1 (Linear) - Steady, even increase in dimming.

Dimmer Mode 2 (Square Law) - Provides ner dimming control

near full intensity.

Dimmer Mode 3 (Inverse Square Law) - Provides ner dimming

control at lower intensities.

Dimmer Mode 4 (S-Curve) - Similar to Linear dimming with ner

dimming control at mid level intensities.

3. Press the UP or DOWN buttons to nd your desired show

mode and press ENTER, then press and hold the MENU button

for at least 3 seconds to conrm.

Slave Mode - This will let you set unit as a master or

slave in a master/slave conguration.

1. Press the MENU button until “Slave Mode” is displayed,

press ENTER. Either “Slave 1” or “Slave 2” will be displayed.

2. Press the UP or DOWN buttons until your desired slave mode

is displayed, press ENTER to conm.

NotE: In a Master/Slave conguration you can make one x-

ture the Master and then set the next xture to “Slave 2”, the

xtures will now have contrast movement to each other.

Black Out - This will control blackout

1. Press the MENU button until “Black Out” is displayed, press

ENTER.

2. Either “Yes” or “No” will now be displayed. Press the UP or

DOWN buttons to toggle between “Yes” and “No”.

3. Press ENTER to conrm your setting.

Sound State - In this mode the unit will run in sound

active mode.

1. Press the MENU button until “Sound State” is displayed, press

ENTER.

2. Either “On” or “O” will now be displayed. Use the UP or

DOWN buttons to toggle between “On” and “O”.

3. Press ENTER to conrm your selection, the press and hold the

MENU button to activate.

Sound Sense - In this mode you can adjust the sound

sensitivity of the sound active mode.

1. Press the MENU button until “Sound Sense” is displayed,

press ENTER.

2. Press the UP or DOWN buttons to adjust the sensitivity level.

The sensitivity level can be adjusted between 0 (the lowest) and

100 (most sensitive).

3. Press ENTER to set you desired level.

Pan Inverse - Pan Inversion

1. Press the MENU button until “Pan Inverse” is displayed,

press ENTER. Either “Yes” or “No” will be displayed.

2. To activate the Pan inversion press the UP or DOWN buttons

until “Yes” is displayed, press ENTER to conm. To deactivate

Pan inversion, select “No” and press Enter.

Tilt Inverse - Tilt Inversion

1. Press the MENU button until “Tilt Inverse” is displayed, press

ENTER. Either “Yes” or “No” will be displayed.

2. To activate the Tilt inversion press the UP or DOWN buttons

until “Yes” is displayed, press ENTER to conm. To deactivate

Tilt inversion, select “No” and press Enter.

©American DJ Supply® - www.americandj.com - Inno Color Beam LED User Manual Page 9 ©American DJ Supply® - www.americandj.com - Inno Color Beam LED User Manual Page 10

Bekijk gratis de handleiding van Adj Inno Color Beam LED, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.