Adj Inno Color Beam LED handleiding

Niet gecategoriseerd

Adj

12 pagina's

PDF beschikbaar

Handleiding

©American DJ Supply® - www.americandj.com - Inno Color Beam LED User Manual Page 12©American DJ Supply® - www.americandj.com - Inno Color Beam LED User Manual Page 11

Back Light - With this function you can make the back-

light automatically turn off after one minute.

1. Press the MENU button until “Back Light” is displayed, press

ENTER.

2. Either “ON” or “OFF” will now be displayed. Press the UP or

DOWN buttons to select “ON” to keep the backlight on at all

times, or “OFF” to allow the backlight to turn o after 2 minutes.

Press any button to turn the backlight on again.

3. Press ENTER to conrm.

Function Delay - With this function the blackout func-

tion under 13 Channel mode can be delayed.

1. Press the MENU button until “Function Delay” is displayed,

press ENTER.

2. Either “No Delay” or time between 1s - 3s will be displayed.

This number represents the delay setting. Use the UP and DOWN

buttons to adjust the blackout delay.

Example: If the delay is set to 3 seconds, when you are in 13

Channel mode under DMX control, and the channel 12 values are

between 226-235, the xture will move, and then blackout after

3 seconds.

3. Press ENTER to conrm.

White Balance - With this function you can adjust the

RGB colors to make your desired color.

1. Press the MENU button until “White Balance” is displayed,

press ENTER.

2. Use the UP or DOWN buttons to nd the color you wish to

adjust.

3. Once you nd the color you want to adjust press ENTER, the

displayed value will begin to ash. Use the UP or DOWN but-

tons to adjust the value. Once you have made your adjustment

press ENTER.

4. Repeat steps 2-3 until satised.

Dimmer Calibrat - With this function you can set the

output intensity.

1. Press the MENU button until “Dimmer Calibrat” is displayed,

press ENTER.

2. A number between 50-100 will be displayed. This number rep-

resents the instensity setting. Use the UP or DOWN buttons to

adjust the LED output intensity. 50 being medium intensity, and

100 being full intensity.

3. When you have found your desired setting press ENTER to

conrm.

Manual Test - With this function you can manually test

the individual features.

1. Press the MENU button until “Manual Test” is displayed,

press ENTER.

2. Use the UP or DOWN buttons to nd the functions or colors

that you wish to test. You can also test the strobe function and

dimmer.

3. Once you nd a function or color you wish to test, press the

ENTER button, the displayed value will begin to ash. You can

now adjust the values by pressing the UP and DOWN buttons.

Once you have nished testing press the ENTER button.

4. To exit the manual test mode, press the MENU button.

Auto Test - This function will run a self test program.

1. Press the MENU button until “Auto Test” is displayed, press

ENTER.

Inno Color Beam LED System Menu Inno Color Beam LED System Menu

Bekijk gratis de handleiding van Adj Inno Color Beam LED, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.