Adj Inno Color Beam LED handleiding

Niet gecategoriseerd

Adj

12 pagina's

PDF beschikbaar

Handleiding

Inno Color Beam LED System Menu

DMX Address - Set the DMX Address -

1. Press the MENU button until “DMX Addresss” is displayed,

press ENTER.

2. “X” will now be displayed, “X” represents the displayed address.

Press the UP or DOWN buttons to nd your desired address.

3. Press ENTER to conrm, and then press and hold the MENU

button for at least three seconds to assign.

Channel Mode - This will let you select your desired

DMX Channel mode.

1. Press the MENU button until “Channel Mode” is displayed,

press ENTER.

2. “X Chan” will now be displayed, “X” represents the displayed

DMX channel mode. Press the UP or DOWN buttons to nd your

desired Channel mode.

3. Press ENTER to conrm.

Show Mode - Show modes 0 - 4 (Factory Shows).

1. Press the MENU button until “Show Mode” is displayed, press

ENTER.

2. “Show X” will now be displayed, “X” representing a number

between 1-4. Press the UP or DOWN buttons to nd your desired

show and press ENTER to conrm. After pressing ENTER, press

and hold the MENU button for at least 3 seconds to activate.

Dimmer Curve - In this mode you can select the dimmer

curve.

1. Press the MENU button until “Dimmer Curve” is displayed,

press ENTER.

2. “MODE X” will be displayed, “X” representing the displayed

dimmer mode. The modes are explained below.

©American DJ Supply® - www.americandj.com - Inno Color Beam LED User Manual Page 7 ©American DJ Supply® - www.americandj.com - Inno Color Beam LED User Manual Page 8

Inno Color Beam LED System Menu

Bekijk gratis de handleiding van Adj Inno Color Beam LED, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.