Adj Focus Spot Two handleiding

Niet gecategoriseerd

Adj

18 pagina's

PDF beschikbaar

Handleiding

ADJ Products, LLC - www.adj.com - Focus Spot Two Instruction Manual Page 26 ADJ Products, LLC - www.adj.com - Focus Spot Two Instruction Manual Page 27

Universal DMX Control: This function allows you to use a univer-

sal DMX-512 controller to control the pan, tilt, gobos, colors, focus-

ing, dimmer and strobe. A DMX controller allows you to create unique

programs tailored to your individual needs.

1. The Focus Spot Two has 2 DMX channel modes; 15 channel

mode and 17 channel mode. See pages 13-18 for detailed

description of the DMX values and traits.

2. To control your fixture in DMX mode, follow the set-up procedures

on pages 10-12 as well as the set-up specifications that are

included with your DMX controller.

3. Use the controller’s faders to control the various DMX fixture traits.

4. This will allow you to create your own programs.

5. Follow the instructions on page 20 to select your desired DMX

channel mode and to set the DMX address.

6. For longer cable runs (more than a 100 feet) use a terminator on

the last fixture.

7. For help operating in DMX mode consult the manual included

with your DMX controller.

Sound Active Mode: This mode allows either single unit or several

units linked together, to run to the beat of the music.

1. Press the MENU button until “Sound State” is displayed, and

press ENTER. Press the UP or DOWN buttons so that “ON” is dis-

played and press ENTER.

2. Press the MENU button until “Sound Sense” is displayed, and

press ENTER. Use the UP and DOWN buttons to adjust the sound

sensitivity. Press ENTER when you have found your desired sensi-

tivity level.

Show Mode: This mode allows either a single unit or several units

linked together, to run one of four shows that you choose.

1. Press the MENU button until “Show Mode” is displayed, and

press ENTER.

2. Press the UP or DOWN buttons to nd your desired show, and

press ENTER.

Focus Spot Two Operation

2. Use the UP and DOWN buttons to make your adjustments, and

then press ENTER to conrm. Press the MENU button for one second

to exit.

Prism Oset - Setting adjustment for the prism.

1. Press the ENTER button for at least 5 seconds, then press the UP

or DOWN buttons so that “Prism Offset” is displayed, press ENTER.

2. Use the UP and DOWN buttons to make your adjustments, and

then press ENTER to conrm. Press the MENU button for one second

to exit.

Rgobo Oset - Setting adjustment for the rotating

gobo motor.

1. Press the ENTER button for at least 5 seconds, then press the

UP or DOWN buttons so that “Rgobo Offset” is displayed, press

ENTER.

2. Use the UP and DOWN buttons to make your adjustments, and

then press ENTER to conrm. Press the MENU button for one second

to exit.

Gobo Oset - Setting adjustment for the gobo wheel.

1. Press the ENTER button for at least 5 seconds, then press the UP

or DOWN buttons so that “Gobo Offset” is displayed, press ENTER.

2. Use the UP and DOWN buttons to make your adjustments, and

then press ENTER to conrm. Press the MENU button for one second

to exit.

Color Oset - Setting adjustment for the color wheel.

1. Press the ENTER button for at least 5 seconds, then press the UP

or DOWN buttons so that “Color Offset” is displayed, press ENTER.

2. Use the UP and DOWN buttons to make your adjustments, and

then press ENTER to conrm. Press the MENU button for one second

to exit.

Focus Spot Two Home Adjustment Menu

Bekijk gratis de handleiding van Adj Focus Spot Two, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.