Adj Focus Spot Two handleiding

Niet gecategoriseerd

Adj

18 pagina's

PDF beschikbaar

Handleiding

ADJ Products, LLC - www.adj.com - Focus Spot Two Instruction Manual Page 24 ADJ Products, LLC - www.adj.com - Focus Spot Two Instruction Manual Page 25

2. The current running temperature of the xture will now be dis-

played. Press MENU to exit.

Fixture Time - With this function you can display the

running time of the unit.

1. Press the MENU button until “Fixture Time” is displayed, press

ENTER.

2. The running time of the xture will now be displayed. Press MENU

to exit.

Firmware Version - This will display the rmware/soft-

ware version

1. Press the MENU button until “Firmware Version” is displayed. Press

the ENTER button and the software vesion will be displayed.

2. Press the MENU button to leave this function.

Pro Default - Restore the factory settings

1. Press the MENU button until “Pro Default” is displayed, press

ENTER. Either “On” or “O” will be displayed.

2. To restore the settings press the UP or DOWN buttons until “On” is

displayed, press ENTER to conm.

Reset - Use this function to reset the motors.

1. Press the MENU button until “Reset” is displayed, press ENTER.

ENTER. Either “No” or “Yes” will be displayed.

2. To reset the xture select “Yes” and press ENTER to conrm. The

xture will now begin to reset.

Focus Spot Two System Menu

To enter the Oset Menu, press the MENU button to unlock the dis-

play, then press the ENTER button for at least 5 seconds. In this sub-

menu you are able to adjust the home position of the pan, tilt, focus,

prism, rotating gobo motor, gobo wheel, and color wheel. To exit this

menu press and hold the MENU button.

Pan Oset - Adjustment of the pan home position.

1. Press the ENTER button for at least 5 seconds, then press the UP

or DOWN buttons so that “Pan Offset” is displayed, press ENTER.

2. Use the UP and DOWN buttons to make your adjustments, and

then press ENTER to conrm. Press the MENU button for one second

to exit.

Tilt Oset - Adjustment of the tilt home position.

1. Press the ENTER button for at least 5 seconds, then press the UP

or DOWN buttons so that “Tilt Offset” is displayed, press ENTER.

2. Use the UP and DOWN buttons to make your adjustments, and

then press ENTER to conrm. Press the MENU button for one second

to exit.

Focus Oset - Setting adjustment for the focus.

1. Press the ENTER button for at least 3 seconds, then press the UP

or DOWN buttons so that “Focus Offset” is displayed, press ENTER.

Focus Spot Two Home Adjustment Menu

Bekijk gratis de handleiding van Adj Focus Spot Two, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.