ADB Eurorack 60 Dimswitch handleiding
Handleiding
Je bekijkt pagina 28 van 74
Dimmer Manager software
Instruction Manual - page 26
Issue: 004
Lighting Technologies
Adjusting the threshold level
The default value for the threshold (trigger) level is 5%.
To adjust this threshold:
• select the dimmer units
• Menu Bar > Command > Learn Show
• set the trigger (threshold) level
Note: the threshold level is in the area ‘All selected dimmer units’ and the new threshold is
applied to all selected dimmer units in a single operation.
Note: if the console applies ‘preheat’ to some dimmers, and this preheat level is higher than the
trigger level, then these dimmers will be tagged “Used: Yes”.
Learn Loads
Learn Loads tests the dimmers, measures the connected load, and memorizes that load as a
reference for future comparison. Learn Loads must only be performed on a lighting rig known
to be OK.
• select the dimmer units
• Menu Bar > Dimmers > Command > Learn Loads
Method No. 3
Activate GRAB at the start of the rehearsal.
Step 3 : stop the learning process
Stop the GRAB learning process by clicking on STOP.
Bekijk gratis de handleiding van ADB Eurorack 60 Dimswitch, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ADB |
| Model | Eurorack 60 Dimswitch |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 13664 MB |
