ADB Eurorack 60 Dimswitch handleiding
Handleiding
Je bekijkt pagina 27 van 74
Dimmer Manager software
Instruction Manual - page 25
Issue: 004
Lighting Technologies
• to start the automatic detection: click Grab
Grab for All Selected Dimmer Units: one click will transmit the order to all selected units
Grab for This Unit Only: if you want to view the changes while they happen
• Menu Bar > File > Save to save this information in the current *.dim file
Step 2 : the lighting control desk tells us which individual dimmers are used in the show
There are different ways to use this automatic mode; three methods are:
Method No. 1
On the lighting control desk:
• build a cue which includes all the dimmers used in the show
• then set all these dimmers at a DMX level of e.g. 10% (above the Trigger Level)
Method No. 2
On the lighting control desk:
• go through the cues one by one
Learn Show – automatic mode using DMX (grab)
Learn Show is performed manually or automatically. In automatic mode, Used Dimmers are
identified by monitoring their DMX level. If the DMX level reaches a value above the threshold level,
the dimmer is "Used". This information is memorized.
One of the possible approaches on the lighting control desk is:
• build a cue which includes all the dimmers used in the show
• then set these dimmers at a DMX level of e.g. 10% (above the Trigger Level)
Step 1: start the automatic Learn Show mode
In Dimmer Manager:
• select the dimmer units required in the show
E.g. by selecting some Groups, or by selecting the NETPORT XT
• Menu Bar > Dimmers > Command > Learn Show
Bekijk gratis de handleiding van ADB Eurorack 60 Dimswitch, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ADB |
| Model | Eurorack 60 Dimswitch |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 13664 MB |
