Acti XNR-4200 handleiding
Handleiding
Je bekijkt pagina 37 van 106
www.acti.com
XNR-4200 User’s Manual 1.02.13
37
PTZ Panel
The PTZ Panel allows you to control camera motion for Pan / Tilt / Zoom enabled cameras.
This is called the optical PTZ mode, in contrast with the digital PTZ available to all cameras via
Standalone NVR.
1. Minimize: Minimizes the PTZ window.
2. Pan-Tilt Control: Click on the arrows to point camera at a given direction. Click and hold
until you arrive at the position you desire.
3. Pan Speed: Adjust Pan Speed from 1 to 5, higher the number, faster the speed.
Caution: Speed varies from protocol to protocol.
Tilt Speed: Adjust Tilt Speed from 1 to 5, higher the number, faster the speed.
Caution: Speed varies from protocol to protocol.
Zoom Speed: Adjust Zoom Speed from 1 to 5, higher the number, faster the speed.
Caution: Speed varies from protocol to protocol.
4. Go to Preset: Make PTZ camera go to preset points. (Only available when you have
done PTZ and Preset Points settings for a PTZ or speed dome camera).
5. Preset Tour: Make PTZ camera cycle through grouped multiple preset points. (Only
available when you have done PTZ and Preset Points settings for a PTZ or speed dome
camera).
6. Zoom Out: Zoom out.
7. Focus In: Focus near.
8. Zoom In: Zoom in.
9. Focus Out: Focus far.
Bekijk gratis de handleiding van Acti XNR-4200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Acti |
| Model | XNR-4200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 27518 MB |
