ZyXEL XGS1935-28 handleiding
Handleiding
Je bekijkt pagina 42 van 468
Chapter 3 Hardware Panels
XGS1935 Series User’s Guide
42
Figure 26 Connecting to the Building’s Main Grounding Electrode
If you are uncertain that suitable grounding is available, contact the appropriate electrical inspection
authority or an electrician.
This device must be grounded. Do this before you make other
connections.
3.2.2 AC Power Connection
Note: Make sure you are using the correct power source as shown on the panel and that no
objects obstruct the airflow of the fans (located on the side of the unit).
To connect power to the Switch, insert the female end of the power cord to the AC power receptacle
on the rear panel. Connect the other end of the supplied power cord to a power outlet.
Power Cord Requirement
Make sure to use the provided or designated power cord for your
Switch.
The following table describes the power cord requirements for the XGS1935 Series.
Note: If you need to replace the power cord, contact your local vendor.
Table 6 XGS1935 Series Power Cord Specifications
COUNTRIES SPECIFICATION SUPPLY VOLTAGE
Europe and United Kingdom 18 AWG 230 V
North America 14 AWG 110 V
Bekijk gratis de handleiding van ZyXEL XGS1935-28, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ZyXEL |
| Model | XGS1935-28 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 44073 MB |
