ZyXEL XGS1935-28 handleiding
Handleiding
Je bekijkt pagina 25 van 468
Chapter 1 Getting to Know Your Switch
XGS1935 Series User’s Guide
25
The Switch supports NebulaFlex for hybrid mode which can set the Switch to operate in either
standalone or Nebula cloud management mode. When the Switch is in standalone mode, it can be
configured and managed by the Web Configurator. When the Switch is in Nebula cloud management
mode, it can be managed and provisioned by the Zyxel Nebula Control Center (NCC).
From Nebula-managed to Standalone
To return to direct management standalone mode, remove (unregister) the Switch from the inventory in
the Nebula web portal.
Note: When you change the Switch’s management mode from Cloud mode to standalone
mode, the Switch will reboot and restore its factory-default settings.
To unregister the Switch:
1 Go to the Nebula Control Center (https://nebula.zyxel.com).
2 Go to the Organization-wide > License & inventory > Devices screen.
3 Select the Switch you want to remove (unregister) from the organization.
4 Click Actions, then click Remove from organization.
It will take a while for the Switch to reboot and reset to factory default.
1.1.3 ZON Utility
With its built-in Web Configurator, including the Neighbor Management feature (Section 13.1 on page
103), viewing, managing and configuring the Switch and its neighboring devices is simplified.
In addition, Zyxel offers a proprietary software program called Zyxel One Network (ZON) Utility, it is a
utility tool that assists you to set up and maintain network devices in a more simple and efficient way.
You can download the ZON Utility at www.zyxel.com and install it on a PC (Windows operation system).
For more information on ZON Utility see Section 4.3 on page 53.
In Cloud mode, you can configure the Switch using both NCC and the Local GUI.
The settings you configure in the Local GUI will apply to the Switch but will not appear in the NCC settings. The
settings you configure in NCC will overwrite the Local GUI settings. It is the latest settings that will apply to the
Switch.
Note: To avoid inconsistency, we recommend you use NCC to configure the Switch and only use the
Local GUI for troubleshooting.
Standalone
mode
Web
Configurator
admin 1234 https://setup.zyxel
OR
https://DHCP-assigned IP
OR
https://192.168.1.1
Table 2 Management Method Comparison (continued)
MODE ACCESS LOGIN USER NAME LOGIN PASSWORD
LOGIN IP ADDRESS/URL/
DOMAIN NAME
Bekijk gratis de handleiding van ZyXEL XGS1935-28, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ZyXEL |
| Model | XGS1935-28 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 44073 MB |
